[hessam]

Hellp;Hellp;Hellp ME

Need to silent install
Pdf Machine 12.12 url:www.broadgun.com
http://www.pdfmachine.com/
And Ashampoo Magical Snap 2.10
And Ashampoo Burning Studio 7.1.0.0
When method /silent AND /VERYSILENT /SP USE PROGRAMs Ashampoo run After silent installation during setup windows xp:help me

[ricktendo64]

IDK if this will work but you can try to kill the task for the Ahampoo soft when it launces (only will work with the new 7zip sfx)

Option 1 TASKKILL

;!@Install@!UTF-8!
GUIMode="2"
RunProgram="setup.exe /SP /VERYSILENT"
RunProgram="hidcon:cmd /c taskkill /f /im process_name.exe /t"
;!@InstallEnd@!

Option 2 TSKILL

;!@Install@!UTF-8!
GUIMode="2"
RunProgram="setup.exe /SP /VERYSILENT"
RunProgram="hidcon:cmd /c tskill process_name"
;!@InstallEnd@!

If you use tskill instead of taskkill don't add the .exe part (BTW the only reason to use tskill is for XP Home compatibility)
And tell me one more thing... Do you use nLite or the Integrator, because there may be a way to add your serials if you use nLite

EDIT: I will download the softs later and let you know how and if i was able to install them and kill the app, also will let you know if its possible to add registration. (cant atm because we have some bad weather and flooding)

[ricktendo64]

OWNED :D

For pdfMachine.exe
- Extract the installer to a sub directory
- Edit bgsconf.ini

quiet = 0

- Change to 1

quiet = 1

Repack the installer and simply make it run bgsSetup.exe

[bober]

help. i need the world, can anyone give it to me? :P

[ricktendo64]

Here is how you install Magic Snap, stop the browser from running, kill the task and enter your registration

;!@Install@!UTF-8!
GUIMode="2"
RunProgram="ashampoo_magicalsnap230_sm.exe /VERYSILENT /MERGETASKS=!regkey"
RunProgram="hidcon:cmd /c tskill ashsnap"
RunProgram="hidcon:cmd /c \"reg add \"HKCU\Software\Ashampoo\Ashampoo Magical Snap 2\" /v RegistrationKey /t REG_SZ /d ABCDEF-123456-ABC123 /f\""
;!@InstallEnd@!

What stops the browser from launching is the /MERGETASKS=!regkey switch
Here is how I found out how to stop the browser from launching using CMenu's Identify Installer

Inno Setup ® Installer.

setup.exe /Option

Install Options
	/LOADINF="filename"
		Instructs Setup to load the settings from the specified file after having checked the command line. This file can be prepared using the '/SAVEINF=' command as explained below.
		Don't forget to use quotes if the filename contains spaces.
	/SAVEINF="filename"
		Instructs Setup to save installation settings to the specified file.
		Don't forget to use quotes if the filename contains spaces.
	/LANG=language
		Specifies the language to use. language specifies the internal name of the language as specified in a [Languages] section entry.
		When a valid /LANG parameter is used, the Select Language dialog will be suppressed.
	/DIR="x:\dirname"
		Overrides the default directory name displayed on the Select Destination Location wizard page. A fully qualified pathname must be specified.
	/GROUP="folder name"
		Overrides the default folder name displayed on the Select Start Menu Folder wizard page. If the [Setup] section directive DisableProgramGroupPage was set to yes, this command line parameter is ignored.
	/NOICONS
		Instructs Setup to initially check the Don't create any icons check box on the Select Start Menu Folder wizard page.
	/NOCANCEL
		Prevents the user from cancelling during the installation process, by disabling the Cancel button and ignoring clicks on the close button. Useful along with '/SILENT' or '/VERYSILENT'.
	/COMPONENTS="comma separated list of component names"
		Overrides the default components settings. Using this command line parameter causes Setup to automatically select a custom type.
	/TASKS="comma separated list of task names"
		* Applies to Inno Setup version 5.1.4, and above.
		Specifies a list of tasks that should be initially selected or deselected. To deselect a task, prefix its name with a "!" character.
		Only the specified tasks (and their children) will be selected; the rest will be deselected. Use the /MERGETASKS parameter instead if you want to keep the default set of tasks and only select/deselect some of them.
		Examples:
		Deselect all tasks, then select the "desktopicon" and "fileassoc" tasks:
		/TASKS="desktopicon,fileassoc"
		Deselect all tasks, then select a parent task item, but exclude one of its children:
		/TASKS="parent,!parent\child"
	/MERGETASKS="comma separated list of task names"
		* Applies to Inno Setup version 5.1.4, and above.
		Like the /TASKS parameter, except the specified tasks will be merged with the set of tasks that would have otherwise been selected by default.
		If UsePreviousTasks is set to yes, the specified tasks will be selected/deselected after any previous tasks are restored.
		Examples:
		Keep the default set of selected tasks, but additionally select the "desktopicon" and "fileassoc" tasks:
		/MERGETASKS="desktopicon,fileassoc"
		Keep the default set of selected tasks, but deselect the "desktopicon" task:
		/MERGETASKS="!desktopicon"
	/PASSWORD=password
		Specifies the password to use. If the [Setup] section directive Password was not set, this command line parameter is ignored.
		When an invalid password is specified, this command line parameter is also ignored.
Display Options
	/SP-
		Disables the This will install... Do you wish to continue? prompt at the beginning of Setup. Of course, this will have no effect if the DisableStartupPrompt [Setup] section directive was set to yes.
	/SILENT
	/VERYSILENT
		Instructs Setup to be silent or very silent. When Setup is silent the wizard and the background window are not displayed but the installation progress window is. When a setup is very silent this installation progress window is not displayed. Everything else is normal so for example error messages during installation are displayed and the startup prompt is (if you haven't disabled it with DisableStartupPrompt or the '/SP-' command line option explained above)
		If a restart is necessary and the '/NORESTART' command isn't used (see below) and Setup is silent, it will display a Reboot now? message box. If it's very silent it will reboot without asking.
	/SUPPRESSMSGBOXES
		Instructs Setup to suppress message boxes. Only has an effect when combined with '/SILENT' and '/VERYSILENT'.
		The default response in situations where there's a choice is:
		Yes in a 'Keep newer file?' situation.
		No in a 'File exists, confirm overwrite.' situation.
		Abort in Abort/Retry situations.
		Cancel in Retry/Cancel situations.
		Yes (=continue) in a DiskSpaceWarning/DirExists/DirDoesntExist/NoUninstallWarning/ExitSetupMessage/ConfirmUninstall situation.
		Yes (=restart) in a FinishedRestartMessage/UninstalledAndNeedsRestart situation.
		5 message boxes are not suppressible: 
		The About Setup message box.
		The Exit Setup? message box.
		The FileNotInDir2 message box displayed when Setup requires a new disk to be inserted and the disk was not found.
		Any (error) message box displayed before Setup (or Uninstall) could read the command line parameters.
		Any message box displayed by [Code] support function MsgBox.
Restart Options
	/NORESTART
		Instructs Setup not to reboot even if it's necessary.
	/RESTARTEXITCODE=exit code
		Specifies the custom exit code that Setup is to return when a restart is needed. Useful along with '/NORESTART'.
Logging Options
	/LOG
		Causes Setup to create a log file in the user's TEMP directory detailing file installation and [Run] actions taken during the installation process. This can be a helpful debugging aid. For example, if you suspect a file isn't being replaced when you believe it should be (or vice versa), the log file will tell you if the file was really skipped, and why.
		The log file is created with a unique name based on the current date. (It will not overwrite or append to existing files.)
		The information contained in the log file is technical in nature and therefore not intended to be understandable by end users. Nor is it designed to be machine-parseable; the format of the file is subject to change without notice.
	/LOG="filename"
		Same as /LOG, except it allows you to specify a fixed path/filename to use for the log file. If a file with the specified name already exists it will be overwritten. If the file cannot be created, Setup will abort with an error message.

I then went to this location in regedit and got a list of those task names to use with TASKS or MERGETASKS swithces: regkey,desktopicon,quicklaunchicon

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Ashampoo Magical Snap 2_is1

I hope with the instructions for magic snap you can figure out a way on your own do do Burning Studio, if you don't let me know and I will give it a shot

[hessam]

VERYVERY THANK YOU .

How to use ((code)) ??
whether from method svcpck who insert code to ENTRIES_name soft .INI
I must code where put
IF perchance ONLY CODE PUT FOR DOWNLOAD upto SOFTWARE ASHAMPOO put TO CODE method

THEN HELP TO Repack Pdf Machine.

Thank you very much.
NOT VERY GOOD ENGLISH.

[ricktendo64]

By the sounds of it you dont know how to make a 7zip switchless installer http://www.wincert.n...?showtopic=1978

[hessam]

very thank you