Hi there.
When I'm connected in my laptop through wireless, the modem reconnect doesnt work because the IP stays the same.
And it also happens at my friends house who has a router and have several computers connected through
wireless or direct link.
What can I do to change the IP?
Thanks a lot
Can someone help me?
Started by
nadavg2000
, May 07 2008 11:44 PM
3 replies to this topic
#2
Kelsenellenelvian
-
- Global Mods
-
- 2,789 posts
Master of my domain!
- Location:U.S.A.
- OS:Windows 7 x64
Posted 08 May 2008 - 03:01 AM
Please try to post in the proper from sections...
#3
NIM
-
- Administrator
-
- 3,839 posts
Vigilant
- OS:Windows 8 x64
Posted 08 May 2008 - 04:40 AM
You probably have a static IP set up..
You should open network connection--> wireless connection properties--> tcpip--> Check "obtain an IP address automatically".
BTW, you didn't mentioned which x64 OS are you using?
You should open network connection--> wireless connection properties--> tcpip--> Check "obtain an IP address automatically".
BTW, you didn't mentioned which x64 OS are you using?
#4
BennyBoy™
-
- Members
-
- 6 posts
Lurker
- OS:non-selected
Posted 12 May 2008 - 10:38 AM
In CMD use the following commands:
ipconfig /release - To release the IP address.
ipconfig /renew - To renew the IP address.
ipconfig /all - To see the current configuration for all network adapters.
Not sure if this will work but I often use those commands to solve network problems.
ipconfig /release - To release the IP address.
ipconfig /renew - To renew the IP address.
ipconfig /all - To see the current configuration for all network adapters.
Not sure if this will work but I often use those commands to solve network problems.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
