Jump to content
Jaanvi

Multiboot dvd

Recommended Posts

WinSetupFromUSBv1.2 x86x64...is the real Tool-works 100%(Tested)...

(Note!! VISTA+up Sources must have Install.wim and NO Install.esd in it-XP has do be unpacked Source)

Share this post


Link to post
Share on other sites

Hey Guys!

 

I can confirm mooms post for rmprepusb.This tool is State of the Art for USB.Multiworkout.

rmprepusb performs all of this Steps (and many more),but not realy userfriendly for me.

It is allso included in WinSetupFromUSBv1.3.

 

WARNING! easy2Boot is a real good Tool,but has Problems with more than 1 Windows Source.(self testet).

 

Allover the named Tools use Grub4Dos or SysLinux as Bootloader.

The tricky Part of preparing an Multiboot (DVD or USBflash) is to integrate the Drivers (such as XP need) in the Bootsection,and form the Grubbootlist most times manual.

(I've used lot of Time and Training to get the same Result as WinSetupFromUSB performs).

Will test the new Versions...and report...

 

Have a nice Day...

Share this post


Link to post
Share on other sites

Hey Guys!

 

Q:Can't we add the drivers with driverpacks mass storage text mode function ?

A:This should work also...append a Gru4Dos"winsetup.lst"+"menu.lst" Sample performed with WinSetupFromUSBv1.3.-Take a Look...

 

WinSetupFromUSBv1.3.-Instal.esd Sources Windows 8.1 x86x64 testet-works 100% on USBflash (DVD?).

Rebuild Grub Menu if you like...(see my Samples).

 

So long...

 

winsetup.lst

color green/black black/light-bluewrite 0x8274 0x2001timeout 240ls /windefault > nul && default /windefaulttitle ...Zurueck zum Hauptmenuels /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag > nulconfigfile /menu.lsttitle \nroottitle OPTIONAL Auto-detect and use F6 SATA/RAID/SCSI Driver\nUse if your internal disk is not detected or getting BSOD 0x0000007B\nSelect once before Text mode of Setup or starting PE1\nCurrently 32 bit versions are supported.\nCreated by Chenall (www.chenall.net/) & Modified by Steve Si (www.rmprepusb.com)#http://bbs.wuyou.com/viewthread.php?tid=197550#http://chenall.net/#http://www.rmprepusb.commap --unmap=0:0xFFmap --unhook && map --rehookls /DPMS/DPMS.ISO > nul || find --set-root --devices=hf /DPMS/DPMS.ISOmap /DPMS/DPMS.ISO (0xfa)|| map --mem /DPMS/DPMS.ISO (0xfa)map --hookroot (0xfa)set FIRA=0/dpms2.g4b 0ls (0)/txtsetup.oem && map (0) (1) && set DPMS=1map --unmap=0xfamap --rehookls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tagconfigfile /winsetup.lsttitle OPTIONAL Auto-detect and use F6 SATA/RAID/SCSI Driver + Firadisk\nTry this entry if the one above does not work on particular machine\nUse once, before Text mode of Setup#http://bbs.wuyou.com/viewthread.php?tid=197550#http://chenall.net/#http://www.rmprepusb.commap --unmap=0:0xFFmap --unhook && map --rehookls /DPMS/DPMS.ISO > nul || find --set-root --devices=hf /DPMS/DPMS.ISOmap /DPMS/DPMS.ISO (0xfa)|| map --mem /DPMS/DPMS.ISO (0xfa)map --hookroot (0xfa)set FIRA=0/dpms2.g4b 0ls (0)/txtsetup.oem && map (0) (1)map --unmap=0xfamap --rehookls (0)/txtsetup.oem && set LOADFIRA=1 && set DPMS=1ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tagconfigfile /winsetup.lst#F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6# #DO NOT REMOVE THESE LINEStitle \nroottitle 1 Windows XP Professional SP3 INSTALLIERENset ISOPATH=/WINSETUP/XPpSP3.ISOif NOT %DPMS%==1 map --unhookif NOT %DPMS%==1 map --unmap=0:0xff  && map --rehooksavedefault +1ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batroot (hd%RDSK%,0)ls %ISOPATH% > nul || find --set-root --devices=h %ISOPATH%map --mem %ISOPATH% (0xff)map --e820cycles=3map --rehookls (0xff)/ > nul && root (0xff)ls (0xff)/ > nul || echo Fatal error while creating virtual disk 0xFF...if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /winsetup.lstif not %RDSK%==1 ls (0xff)/I386/TXTSETUP.SIF > nul && cat --locatei=rdisk(1) --replace=rdisk(%RDSK%) (0xff)/I386/TXTSETUP.SIFif not %RDSK%==1 ls (0xff)/AMD64/TXTSETUP.SIF > nul && cat --locatei=rdisk(1) --replace=rdisk(%RDSK%) (0xff)/AMD64/TXTSETUP.SIFif %LOADFIRA%==1 ls (0xff)/I386/TXTSETUP.SIF > nul && cat --locatei=;;FIRA;; --replace=;;FIRA\r\n (0xff)/I386/TXTSETUP.SIFls /I386/SETUPLDR.BIN > nul && set LDR=/I386/SETUPLDR.BINchainloader %LDR%pause --wait=1 Launching Setup from (hd%RDSK%,0)boot#we should not get here but just in case of errors above...map --unhookmap --unmap=0:0xff && map --rehooktitle 2 Von 1 Internen Festplatte BOOTENsavedefaultls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batif "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lstpause --wait=1 Booting MBR on hd0 ...chainloader (hd0)+1rootnoverify (hd0)title \nroot

 

 

menu.lst

color green/black black/light-bluetimeout 240#graphicsmode 0x6Agraphicsmode -1 640 480:800 24:32 || graphicsmode -1## Menu AutoNumberwrite 0x8274 0x2001#graphicsmode -1 800:640 -1 24:32 || graphicsmode -1#font /unifont.hex.gz#clear mappings and set root in case we return from bootmgrmap --unmap=0:0xffmap --unhookmap --rehookls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag > nulls /default > nul && default /defaulttitle WINDOWS XP PRO SP3    (PREAKTIVERT INSTALLIEREN)\nAuswahl im folgenden Untermenuemap --unmap=0:0xffmap --unhook && map --rehooksavedefaultls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tagconfigfile /winsetup.lsttitle WINDOWS Vista/7/8/8.1 (PREAKTIVERT INSTALLIEREN)\nAuswahl im folgenden Untermenuemap --unhookmap --unmap=0:0xff && map --rehooksavedefault +1ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batif "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lstroot (hd%RDSK%,0)chainloader /BOOTMGRtitle WINDOWS          (BOOTE von Interner FESTPLATTE)\nBootet falls vorhanden das installierte System auf HD 0/1.map --unhookmap --unmap=0:0xff && map --rehooksavedefaultls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batif "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lstpause --wait=1 Booting MBR on hd0 ...chainloader (hd0)+1title Windows NT6 (Vista/7 and above) Setupmap --unhookmap --unmap=0:0xff && map --rehooksavedefault +1ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batif "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lstroot (hd%RDSK%,0)chainloader /BOOTMGRtitle Second part/continue NT6 Setup (Boot first internal disk)map --unhookmap --unmap=0:0xff && map --rehooksavedefaultls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batif "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lstpause --wait=1 Booting MBR on hd0 ...chainloader (hd0)+1

Share this post


Link to post
Share on other sites

@jo72

i already know about winsetupfromusb.

I actually this for installing win xp to my pc.

But you not read my question carefully, i am asking for the multiboot dvd not for multiboot usb.

@mooms

i do not found the link for downloading xp powerpacker

Share this post


Link to post
Share on other sites

Than sorry Jaanvi...

 

Just want to help you.

mooms Post  13 January 2014 - 12:08 AM Link XP Powerpacker works to me...

You sould hang on mooms Way for build an multi DVD...

I go on build an ultimate MultiUSB just for Fun...(Maybe you change your Preferences from DVD to USB-works just a little faster ;) ).

 

So good Luck...and...You know...

Share this post


Link to post
Share on other sites

As far as I remember, PowerPacker is not hard to use.

The cool thing with it is it can make multi-versions of XP without taking huge space (same files are not duplicated on the CD/DVD).

I've used it once to make XP with and without Driverpacks & Attended/Unattended on the same CD, but it can do much more than that.

I agree USB is better these days, but some old computers can't boot from USB.

Share this post


Link to post
Share on other sites

ok i download it from softpedia.

Now guys the same question hold for xp and 7 i.e.

How to make multiboot dvd for win xp sp3 and win 7 sp1

Share this post


Link to post
Share on other sites

ok i download it from softpedia.

Now guys the same question hold for xp and 7 i.e.

How to make multiboot dvd for win xp sp3 and win 7 sp1

There is no way to do that. i am currently developing such software.so wait untill i Finish it.

Share this post


Link to post
Share on other sites

Just let You know.

 

Finally complete the Multiboot USB-Flash 16GB Project with WinSetupFromUSB.

Baby it works...yippie ya yeah.

Going to transport it on a optical Media if it's possible.

Will report...to be continued.

 

Who's curious my 2 GRUB4DOS Setup's and Details in It attached...

(Sorry Uploading multipl.FAILED-So in pure txt.).

 

menu.lst

color green/black black/light-blue
timeout 240

#graphicsmode 0x6A
graphicsmode -1 640 480:800 24:32 || graphicsmode -1
## Menu AutoNumber
write 0x8274 0x2001

#graphicsmode -1 800:640 -1 24:32 || graphicsmode -1
#font /unifont.hex.gz


#clear mappings and set root in case we return from bootmgr
map --unmap=0:0xff
map --unhook
map --rehook
ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag > nul
ls /default > nul && default /default


title BOOTE von Erster Interner FESTPLATTE\nBootet falls vorhanden das installierte System auf HD 0/1.
map --unhook
map --unmap=0:0xff && map --rehook
savedefault
ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat
/shifthd.bat
if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lst
pause --wait=1 Booting MBR on hd0 ...
chainloader (hd0)+1


title WINDOWS 7 und 8.1 (PREAKTIVIERT INSTALLIEREN)\nAuswahl im folgenden Untermenue
map --unhook
map --unmap=0:0xff && map --rehook
savedefault +1
ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat
/shifthd.bat
if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lst
root (hd%RDSK%,0)
chainloader /BOOTMGR


title WINDOWS XP PRO SP3 (PREAKTIVIERT INSTALLIEREN)\nAuswahl im folgenden Untermenue
map --unmap=0:0xff
map --unhook && map --rehook
savedefault
ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag
configfile /winsetup.lst

title WindowsPE.3.1x64 MRR.CD+WinExplorer
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/00.WindowsPE.3.1x64_____________MRR.CD+WinExplorer.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title PC.Welt-Notfall-AIO.KNOPPIX 6.7
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/01.PC.Welt-Notfall-AIO.KNOPPIX__6.7.ISO
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title ULTIMATE-BootCD 5.2.5
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/02.ULTIMATE-BootCD______________5.2.5.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title PMAGIC 2013.06.15
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/03.PMAGIC_______________________2013.06.15.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title PARAGON-FestPlattenManager 12PRO
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/04.PARAGON-FestPlattenManager___12PRO.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title NT.PasswordReseter 110511
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/05.NT.PasswordReseter___________110511.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title KON-bootCD 2.1
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/06.KON-bootCD___________________2.1.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title MEMtest86 4.3.0b
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/07.MEMtest86____________________4.3.0b.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title HITACHI-DriveFitnessTestx86 4.16b00
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/08.HITACHI-DriveFitnessTestx86__4.16b00.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title AVIRA-LiveCD 12.2012
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/09.AVIRA-LiveCD_________________12.2012.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title BITDEFENDERrescueCD 03.2013
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/10.BITDEFENDERrescueCD__________03.2013.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title GPARTED 0.16.1
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/11.GPARTED______________________0.16.1.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title OSF.Clone 1.0.1008
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/12.OSF.Clone____________________1.0.1008.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

title CLONEZILLA 2013.02.26
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /a dev=*0x8280&0xff
root (%dev%,0)
set ISO=/ISO/13.CLONEZILLA___________________2013.02.26.iso
ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo  && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo  && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /a dev=*0x82a0&0xff
debug 1
parttype (%dev%,3) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo  && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)


winsetup.lst

color green/black black/light-blue
write 0x8274 0x2001
timeout 240
ls /windefault > nul && default /windefault

title ...Zurueck zum Hauptmenue
ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag > nul
configfile /menu.lst

title \n
root



title 1.OPTION Autodetect und benutze F6 SATA/RAID/SCSI Treiber\nDiese Option benutzen wenn 1.interne HD nicht erkannt wird oder Stop BSOD 0x0000007B angezeigt wird\nAuswaehlen vorm TextModeSetup oder PE1 Start\n!!Im Moment nur 32Bit Unterstuetzung!!\nLINKs (www.chenall.net/) & (www.rmprepusb.com)
#http://bbs.wuyou.com/viewthread.php?tid=197550
#http://chenall.net/
#http://www.rmprepusb.com
map --unmap=0:0xFF
map --unhook && map --rehook
ls /DPMS/DPMS.ISO > nul || find --set-root --devices=hf /DPMS/DPMS.ISO
map /DPMS/DPMS.ISO (0xfa)|| map --mem /DPMS/DPMS.ISO (0xfa)
map --hook
root (0xfa)
set FIRA=0
/dpms2.g4b 0
ls (0)/txtsetup.oem && map (0) (1) && set DPMS=1
map --unmap=0xfa
map --rehook
ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag
configfile /winsetup.lst



title 2.OPTION Autodetect und benutze F6 SATA/RAID/SCSI Treiber+Firadisk Treiber\nDiese Option benutzen wenn obere Funktion nicht Funktioniert\nAuswaehlen vorm TextModeSetup
#http://bbs.wuyou.com/viewthread.php?tid=197550
#http://chenall.net/
#http://www.rmprepusb.com
map --unmap=0:0xFF
map --unhook && map --rehook
ls /DPMS/DPMS.ISO > nul || find --set-root --devices=hf /DPMS/DPMS.ISO
map /DPMS/DPMS.ISO (0xfa)|| map --mem /DPMS/DPMS.ISO (0xfa)
map --hook
root (0xfa)
set FIRA=0
/dpms2.g4b 0
ls (0)/txtsetup.oem && map (0) (1)
map --unmap=0xfa
map --rehook
ls (0)/txtsetup.oem && set LOADFIRA=1 && set DPMS=1
ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag
configfile /winsetup.lst


#F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6# #DO NOT REMOVE THESE LINES


title \n
root



title 1.Windows XP Professional SP3-INSTALLIEREN
set ISOPATH=/WINSETUP/XPpSP3.ISO
if NOT %DPMS%==1 map --unhook
if NOT %DPMS%==1 map --unmap=0:0xff  && map --rehook
savedefault +1
ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat
/shifthd.bat
root (hd%RDSK%,0)
ls %ISOPATH% > nul || find --set-root --devices=h %ISOPATH%
map --mem %ISOPATH% (0xff)
map --e820cycles=3
map --rehook
ls (0xff)/ > nul && root (0xff)
ls (0xff)/ > nul || echo Fatal error while creating virtual disk 0xFF...
if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /winsetup.lst
if not %RDSK%==1 ls (0xff)/I386/TXTSETUP.SIF > nul && cat --locatei=rdisk(1) --replace=rdisk(%RDSK%) (0xff)/I386/TXTSETUP.SIF
if not %RDSK%==1 ls (0xff)/AMD64/TXTSETUP.SIF > nul && cat --locatei=rdisk(1) --replace=rdisk(%RDSK%) (0xff)/AMD64/TXTSETUP.SIF
if %LOADFIRA%==1 ls (0xff)/I386/TXTSETUP.SIF > nul && cat --locatei=;;FIRA;; --replace=;;FIRA\r\n (0xff)/I386/TXTSETUP.SIF
ls /I386/SETUPLDR.BIN > nul && set LDR=/I386/SETUPLDR.BIN
chainloader %LDR%
pause --wait=1 Launching Setup from (hd%RDSK%,0)
boot
#we should not get here but just in case of errors above...
map --unhook
map --unmap=0:0xff && map --rehook

title 2.Von der 1 Internen Festplatte-BOOTEN
savedefault
ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat
/shifthd.bat
if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lst
pause --wait=1 Booting MBR on hd0 ...
chainloader (hd0)+1
rootnoverify (hd0)

title \n
root
 

Share this post


Link to post
Share on other sites

My last post for this topic.

 

Done a lot attampts to port the multibootUSB-Flash to ISO eg.DVD.(burning&emulating-beware wich QEMU version you use!).

Many candidates are on the start-rmprepusb is the winner.

Conclusion:rmprepusb has all on bord we need for building and porting.

 

BUT...

The sticking point is once again the grub4dos menu.list witch has to be modified by txt.edit for an optical media (primary the ISO sourcepaths/XP help :doh: drivers for example FiraDisk/and layout).

 

To cut a long story short...I surrender!

 

Not willing to spend more time in the ISO-DVD version because it's out of date for me.

Done my best-sorry again Jaanvi.

 

For those who want go deeper in matter, the Link's that was very helpfull to build a professional workbasic.

http://www.rmprepusb.com/tutorials/grub4dos

http://www.rmprepusb.com/tutorials/firawiniso

http://www.911cd.net/forums/index.php?showtopic=18045

http://www.msfn.org/board/topic/95537-multiboot-vista-xp-and-other-oses-with-grub4dos-menu/

http://diddy.boot-land.net/grub4dos/files/boot.htm

http://xpt.sourceforge.net/techdocs/nix/disk/btmk/btmk10-WindowsSpecificMultiBootingUSB/ar01s03.html

Hot for porting:http://www.rmprepusb.com/tutorials/makegrub4dosiso

Godspeed!...

 

ps:Maybe you should spend a little time to work on your good manners Jaanvi how you perform your re-posts.

    Primary intention was to  build an satisfying result to your question.

    So think twice ma dear... :doh: no offence!

Bye...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×