Jump to content
Legolash2o

WIM Splitter

Recommended Posts

WIM Splitter is the tool where you can split a large install.wim into smaller *.swm so you can fit your installation disk onto a CD.

post-10183-0-13160900-1332935874_thumb.p

Step 1: Select the WIM

Click the first browse button and select the *.wim file you want to split.

Step 2: Choose your 'Size'

Type in the maximum size you want each separate files to be.

Step 3: Select your 'Output' folder

Select the folder you want the new separate files to go.

Step 4: Press start

Press start and wait for it to finish :)

Option: Rebuild

Rebuild options literally rebuilds the image so that it becomes smaller which then in turn makes your ISO smaller. This is only needed if you have made modifications to an image.

Edited by Legolash2o

Share this post


Link to post
Share on other sites

Hello :)

 

I ran into the same issue. Once I split the install up, I couldn't for the life of me figure out how to make the parts into burnable images.

 

I found this page: http://rmencia.wordpress.com/2010/07/07/creating-windows-oem-recovery-dvds-with-windows-aik-part-1/ explaining how to do it. Though, I ended up just going to the store and buying a blank Dual Layer DVD. I was only going to split the images up because I didn't have one on hand.

 

Hope this helps.

Share this post


Link to post
Share on other sites

Ok, back again.

 

I have another install that I was wanting to put on a much older computer. So I tried again to split the install up so I could put it on CDs. I tried the previous guide that I posted and I then also tried this one: http://technet.microsoft.com/en-us/library/dd744579%28v=ws.10%29.aspx

 

I followed both guides TO THE LETTER. I moved all my stuff around and installed things exactly where they did in the examples they gave for the guides. I payed attention, used my brain as much as I could, tried several times.. But nothing worked as it was advertized. I mean nothing. I even used other tools to get over humps, such as using the toolkit here to split up the install (WIM) into CD sized *.swm chunks instead of AIK as AIK refused to do it's job the way I was told to tell it to.

 

I'm hoplessly lost at this point. I'm going to keep trying. Other guides, searching for some magic program that will just make it work through sorcery and reading other forums elsewhere on the net. I might even try real sorcery! As soon as I find a solution (if I do), I'll post it here.

 

I just hope I don't have to climb the highest mountain in Tibet and present a spiritually appropriate gift to the Yogi of WIM after answering three metaphysical questions to gain the right of enlightenment.

Share this post


Link to post
Share on other sites

It might help to post EXACTLY what didn't work, ie how do you know it didn't work?  What did you expect to happen and what happened instead, or what exact error did you get and where did you get it?  What was your total method step by step, and when did you realize it wasn't going to work?  What alternate tools did you try and what happened when using each tool?

 

No offense meant, but from your posts above, all I can tell is that you tried several tools, TO THE LETTER, and it didn't work.

 

Cheers and Regards

Share this post


Link to post
Share on other sites

I'd like to first say, sorry for my frustration that I vented on the board. Of coarse, the problem has been solved. I set asside two pata dvd drives (one for a desktop and one for a mobile) to use in just such an event.

I also want to extend my sincerest thanks to everyone who has made these tools free and available. All of your hard work and expertise is definitely appreciated. Seriously.

Ok, to the questions:

Exactly what didn't work - my own failure.

I used the WIM splitter to split up the WIM into parts that would fit on a CD. The ISO maker included with Win Toolkit would not work with it because it said that they where "read only" and what to do with my couch.

What I expected to happen (and I try not to presume much) was for the ISO maker, after I pointed it at the first of the SWM files, to say "sure, no problemo. Let's make something you can burn on a cd!" What happened instead was the error message saying that SWM files are read only and thus Win Toolkit can't work with them unless you use SWM merger to make them all into one big WIM that won't fit on a CD again.

I got this error after I opened the ISO creater and pointed it at the first SWM file.

My total method: I shall make screen shots while recreating my attempt in a bit.

The alternate tools I used where first: CDburnerXP. Someone in another forum suggested using it because it was able to split disks up into multiple sessions (multi span I think they called it) and be able to burn anything off in ISO format. Well, that didn't work. The software worked as advertised on it's own site, but it can't split a whole file up into parts, it can only span a bunch of smaller files across several disks.

Next I used Windows AIK. Got a great little tutorial that showed step by step how to do this from the command prompt. I listed that tutorial in a link in one of my last posts. It could be because I was using some different version than what the guy who wrote the tutorial was using, but all directories on my end and his where in different places and we had completely different exe's in those directories. I searched using a wildcard to see if the executables of WAIK he was using where even on my hard drive anywhere, be that system, hidden, Narnia, etc etc.. I had one of them if I remember correctly.

After two all nighters I finally gave up. I don't honestly think the issue is with any software I got from here, elsewhere or any tutorial. I really think the problem is on my end because of my lack of knowledge and experience.

Share this post


Link to post
Share on other sites

Also, thank you for caring enough to ask. Also for not getting mad at me and banning me from the site, lol. I've seen many things here I really like and I've learned A LOT since I started this venture. Mostly from readin the forums here! :)

Share this post


Link to post
Share on other sites

SPANISH:

 

Hola a todos... he utilizado WimSplitter. Al dividir a WIM, quiero grabar en los DVD´s la imagen principal y en otro dvd las demás partes divididas.

 

Cuando instalo en un computador, el DVD 1 me solicita ingregar el DVD2 pero el DVD 2 no me reconoce.

 

¿Cómo debo crearlos correctamente? ¿Qué debo guardar en el segundo DVD y cómo debo crearlo?

 

 

 

Hello everyone ... I used WimSplitter. By dividing WIM, I want to burn DVDs in the main picture and another dvd other divided parts.

 

When I install on a computer, the DVD 1 asks me ingregar DVD2 DVD 2 but does not recognize me.

 

How do I create them correctly? What should I keep in the second DVD and how do I create it?

Edited by bphlpt
Added Translation

Share this post


Link to post
Share on other sites

You need the swm files in a sources folder on each disk. I will add the info within WTK to prevent future confusion :)

 

C:\span\DVD1\source\install.swm

C:\span\DVD2\source\install2.swm

 

https://technet.microsoft.com/en-gb/library/hh825096.aspx

 

 

Hi, thanks for answering.
 
I created the install.swm file, install2.swm, install3.swm, install4.swm
 
These files I have saved in my project:
 
C: \ Win7 \ source \ install.swm
C: \ Win72 \ Source \ install2.swm + install3.swm + install4.swm
 
I recorded two DVDs but does not work when I install.
 
1 DVD recorded with the label DVD1
DVD 2 recorded with the label DVD2
 
DVD 1 contains folders including system installation install.swm
SOURCE DVD2 contains the folder with install2.swm + install3.swm + install4.swm files
 
When income DVD1, installs perfect to insert DVD2 not already installed, a mistake ue there idicandoq the install file is displayed.

Share this post


Link to post
Share on other sites

I'm not using this method and don't know how it works but I'm curious why you need 4 install.swm files when you are using only two discs? Isn't install.swm and install2.swm enough?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

    • By Legolash2o
      SWM Merger is the tool where you can merge smaller *.swm files into a larger editable install.wim.

      Step 1: Select the main SWM
      Click the first browse button and select the *.swm file you wish to merge
      Step 2: Select your 'Output' file
      Select the location where you want your new install.wim to go.
      Step 3: Press start
      Press start and wait for it to finish
    • By Legolash2o
      The 'Driver Installer' lets you install any driver either from driver packs or you just have an updated driver to the computer currently installed (Live).
      Installing Drivers

      Step 1: Select the folder your drivers are in
      Use the 'Add Drivers' to select the folder which contains your drivers *.inf files
      Note: *.inf files with the same MD5 will not be added, this avoids installing the same driver.
      Step 2: Click Start
      Once your files have been added, click 'Start' and W7T will start installing the drivers on your computer.
      Step 3: Wait
      Wait may take some time to install all the drivers, so go for coffee, cup of tea or whatever you prefer. W7T will let you know when it's done.
      Uninstalling Drivers

      Step 1: Press the scan button
      This will check which drivers are already installed via on your live system.
      Step 2: Select the drivers you want to remove
      Tick the boxes next to the drivers your want to remove.
      Step 3: Press 'Uninstall' and wait
      Now all you have to do is sit back and wait for those obsolete drivers to be removed, W7T will update the list once completed.
    • By Legolash2o
      XP and Vista users: You will need to use the DISM Installer in order for W7T to work on your Operating System!
      Windows 7 Toolkit is a program designed to help you integrate your Updates, Drivers, Theme Packs, Tweaks, Wallpapers, Addons, SFX Installers, Gadgets and remove the things you don't want from your Windows 7 Image.
      Tools Manager is the main window for Windows 7 Toolkit, there are many tools which you can select.
      Main - Basic

      All-In-One Integrator

      This is the greatest tool in W7T, it's let you integrate, Addons, Remove Components, Drivers, Gadgets, Language Packs, Edit Services, Silent Installs, SFX, Theme Packs, Tweaks, Updates and Wallpapers!
      ISO Maker

      This is what it says on the tin, it creates your ISO file for you to burn! Now supports UEFI!
      Windows 7 Toolkit Guides

      A nice direct link to guides on how to use Windows 7 Toolkit
      SoLoR SP1 Updates

      SoLoR works very hard and providing ALL the updates released since Service Pack 1 so he should get credit for this, this little tool lets you easily download his updates which Microsoft has released via Windows Updates but more importantly which Microsoft has also released privately and which are not released via Windows Update.
      Windows 7 SP1 ISO

      Since i prefer my users to use the latest service packs, i have added a link to a completely free, legal and official download source to the Windows 7 SP1 DVD. Note, you will still need your own serial key.
      Main - Intermediate

      Unattended Creator

      I'm sure you can guess what this is, this creates an Unattended file which you use to install Windows with, just create and make sure you place the new file in the DVD root.
      USB Boot Prep

      Prepares your USB stick so you can install Windows from it, obviously your computer needs to support USB booting!
      WIM Manager

      Manage and edit your install.wim, for example you can rename images, delete images, add new ones, create ISO, rebuild, mount, unmount, etc... You can also use this tool to integrate your unattended files.
      Main - Advanced

      All-In-One Disk Creator

      This tool let's you combine all your WIM files into one DVD, this is most commonly used is to merge x86 and x64 disks.
      Component Removal

      This program let's you remove over 100 components which comes with Windows, some of them are Internet Explorer, IIS, Windows Media Player, Sample Pictures, Tablet PC components, etc... I am also planning on adding some more eventually.
      WIM Registry Editor

      This tool mounts the wim and then it's registry so you can add your tweaks into that image!
      Tools

      Converters
      Language Pack Converter

      Converts Langauge Packs which are in the exe format to cab so you can integrate them.
      MSP Extractor (MS Office)

      Converters Office Updates to msp so they can automatically install when you install Office.
      MSU > CAB Converter

      Converts MSU to CAB files so you can integrate them or install on your current OS via the CAB Installer.
      Online Installers
      Driver Installer

      This will install drivers on your currently installed system using pnputil.exe, it will only install the drivers you need.This tool also lets you uninstall drivers too.
      Update Installer

      This will install updates on your currently installed system, probably mostly used by those who use SoLoR Updates. This tool also lets you uninstall old updates too.
      Image Tools
      SWM Merger

      Merge *.swm files into a larger *.wim file so it can be edited.
      WIM Splitter

      This tool splits your install.wim into multiple files so you can fit them onto multiple CDs.
      Capture Image

      Captures new WIM images, so you can use that new image to install Windows.
      Other Tools
      Addon Maker

      This tool is for advanced users to create .WA files which other users can use the All-In-One Tool to integrate into your image.
      CAB Retriever

      When Windows Update downloads updates, the cab files get left in a folder. This tool retrieves those files so you can integrate them.
      Downloads

      This has links to the most popular downloads you should need for W7T.
    • By Legolash2o
      The 'All-In-One Disk Creator' lets you create all in one disks, so for example you can have Windows 7 SP1 x86 and Windows 7 SP1 x64 in disk, you could further include Vista or 2008 server if you wished.

      Step 1: Select your first image.
      Press the 'Browse' button and select your first install.wim, you should then see all the images get lists
      Step 2: Select your second image
      Press the 'Browse' button again and select your second image, you should now see even more images added.
      Optional 1: Add more images
      You can keep hitting browse and add more and more images until your ready.
      Optional 2: Delete the images you dont want!
      Step 3: Press Create
      W7T will then merge all of the images together, it will also try the best it can to resolve name conflicts however you may have to use the 'Edit' button and change some names to that NONE of them are the same, don't worry about descriptions, they won't conflict.
      WARNING: It is really important that none of the images have the same name, W7T will try for example add 'x64' or 'x86' to the names of the images to remove conflicts, however sometimes this is not enough.
      Optional: Rebuild
      You can choose to rebuild your newly created image so that it can produce a smaller ISO.
      Optional: ISO Maker
      Self-explanatory, make a new ISO with your new creation.
      Options

      Unlock All Editions

      Usually an image is locked to one edition i.e. Ultimate, so when it comes to install you don't have the option of choosing. Unlocking them will ask you which version of Windows you wish to install after booting from the ISO/USB.
      x64 Recovery Mode

      This will copy the 64bit Recovery Mode files, so if something happens to your computer and it's 64bit, you can use this option.
    • By Legolash2o
      This tool lets you remove built-in Windows packages from your image, for example Windows Media Player, Windows Media Center or Internet Explorer. The difference between this and vLite is that this tool uninstalls them the official way rather than remove files the downside is that the image does not shrink as much as just removing the files. It also lets you remove old updates.
      WARNING: Anything you remove using this tool can't be undone, it is permanent!

      Step 1: When you first open up this tool you will be asked to select the image you wish to work with. Click 'Browse' and select the install.wim you wish to work with and then either click on the item Windows version you want and press select or just double click.

      Once done, the image will start to mount and retrieve all available packages within the image, it will not show ones which have already been removed.
      Note: You may notice that this list has more than the list available in 'All-In-One Integrator', this is because in the AIO i have only included the basics, whilst Component Remover will include everything, including updates.
      Step 2: Select the items you want to remove
      Once all the items have been listed, you can select the components you wish to remove.
      Green: Safe to remove.
      Yellow: Unknown, be careful removing these
      Red:This will break something, something depends on this feature but it will hopefully say what it is.
      Step 3: Begin
      Once you have everything selected, you can now click 'Remove Components', once done it will rescan and shows you what's left in the image.
      Step 4: Save
      Once done, you can go ahead and close the tool, click 'Yes' and it will ask you if you want to save the image, i recommend you to 'Save & Rebuild', however if you are going to be working on more than one image then just rebuild once you're done with your last image.
×