Hi, since around 1.5 half years i am integrating Updates into our Windows Image at our Company. However i have noticed that even when all the latest Updates are integrated after installing the OS it shows a few ".NET Framework" Updates that couldn't be integrated (see Attachment). A year ago it were only around 10, now around 15. So its getting more and more, it hinders the usfulness of the Slipstreaming process a bit.
Did anyone of you find a way to integrate this pesky ".NET" Updates into the Image?
Thanks for the help.
Today I will show you how to install Windows 8/8.1 on a PC without a CD/DVD/USB, directly onto the HDD, even without the installation wizard/setup ! [Fastest Method]
Yesterday my new hard drive for my laptop arrived, and instead of cloning my existing disk, I decided to do a clean install of Windows 10. But I didnt have much time, cuz after installing windows 10, I had to copy my existing downloads, pictures, videos, install programs, etc. & I thought there must be some other way to easily install windows 10 without that installation wizard/setup. After some research, I made my own method, & installed it succesfully, faster than their setup wizard! Now I am gonna show you how to accomplish that. [This guide will work for Windows 8/8.1 also] Lets Begin!
Seperate Hard Drive with atleast 20GB space, with only 2 primary partitions [where you have to install Win8/8.1] [An empty/new hard drive is highly recommended] Working PC/laptop with Windows XP or above installed, with Internet access Procedure:
Firstly, download Windows 8/8.1 ISO & extract it to C:\win8 using some archive manager like 7zip/winrar, or COpy the Windows 8/8.1 CD contents to C:\win8. Now connect that separate hard drive to your PC (If you have externel harddrive cage, then connect to it, else buy a SATA to USB hard disk enclosure like this one) Open a command prompt as administrator (Go to start menu > search cmd > Rightclick on the first search result & RUn as administrator) Type: diskpart Now type: list disk It will show the disks connected to your PC. According to the size shown, you should be able to know which is your disk. Type: select disk X [Replace X with the disk number which you saw in the previous guide, in my case it was disk 1] Type the following one by one: create partition primary size=350 format fs=ntfs unit=4096 label="System Reserved" quick active assign letter=P create partition primary size="Any size convenient for you, in MB" format fs=ntfs label="Windows 8" quick assign letter=Q exit Your partitions have been configured! Now, if you are in Windows 7 (or below), download DISM from here, open the file, when It will ask for extraction folder, change the location to: C:\dism
Now in Windows Explorer, browse to c:\win8\sources (sources folder inside the folder where you copied/extracted setup files) & check whether you have install.esd or install.wim. Now you have to know the index number in the wim/esd file, of the Win8/8.1 edition which you want to install. Type the following commands in an administrator CMD:
cd c:\dism ## [DO NOT TYPE THIS] Skip the first line if you are running Windows 8/above. dism /get-wiminfo /wimfile:C:\win8\sources\install.esd ## This should output the index numbers of different windows 8/8.1 editios. ## Note down the index number of your chosen edition. ## Also, if you have an insall.wim instead of install.esd in your \sources folder, ## Then replace install.esd with install.wim (in 2nd command). Now, this is the most important step. All the windows files will be copied to the partition.
cd c:\dism Dism /apply-image /imagefile:C:\win8\sources\install.esd /index:1 /ApplyDir:Q:\ ## [DO NOT TYPE THIS] You can replace /index:1 with the index number which we ## found out earlier. ## Also, if you have an insall.wim instead of install.exe in your \sources folder, ## Then replace install.esd with install.wim (in 2nd command). If you have an install.esd file instead of wim file, Windows XP & Windows 8 users may (cuz I havent tested in them, but it works in 8.1 & 10) need to convert the install.esd file into an install.wim file (if some error shows up). Search in Google How to convert esd to wim Now you have successfully extracted all the files for windows! Now all you have to do is prepare the boot files in the System Reserved partition.
Now you are gonna prepare the System Reserved partition for booting into Win8/8.1 succesfully. Type the following in administrator CMD:
bcdboot Q:\Windows /l en-us /s P: /f ALL ## [DO NOT TYPE THIS] You can replace en-us with your locale, ## For eg. en-in, en-gb, en-ru etc. Everything is done! You are now ready to go! Now boot into the drive. If you did everything correctly & succesfully, then Windows will boot to the welcome screen. Done! Enjoy the manually installed Windows!
Hope this guide was helpful & easy to you. If you have doubt about something or you got any errors, or if windows doesnt boot after performing all the steps correctly, then feel free to post below.
Cheers & Regards,
...since the home server(?) at http://testing.wintoolkit.co.uk/ is down, or acting weird, quite often. And it again. And it appears that no one else mirrors your 0.56MB application anywhere, ever. Currently, all your links are broken, and I've been hunting all over the internet for the last three hours for a way to find it. In fact, this is a big enough issue that the fourth of four Google results for "2.0.5860.25216.7z" is a pretty damn convincing, and extremely nasty malware trap: http://solari.victus-rpg.com/showthread.php?tid=84314 . I just spent the last 45 minutes wrestling control of my computer back from that beast. The only other v2.x one can find on the internet is at http://www.datafilehost.com/d/2b73ce8b, which was uploaded in another wincert.net thread a few months back when a similar thing was happening, but it is the older 2.0.5651.42757, which no longer runs due to a built-in expiration date.
So, yeah. A mirror would be good; and in the mean time, anyone have a copy of 2.0.5860.25216.7z laying around?
Thanks, your friend,
Geoff (or, I guess, "f483755" today)
Sunday 17th January 2011 2:18pm
Have you considered adding RamDisk capability to the Toolkit? I manually run DISM using a RamDisk (Created with Open Source ImDisk: http://www.ltr-data.se/opencode.html) as the ScratchDir and it is significantly faster!
Also, maybe someone could help me determine why DISM fails to integrate updates when the MountPoint is on a ramdisk?