Jump to content
Sign in to follow this  
geodasoft

PDFCreator 4.0.4/2.5.3[Desatendido][Multilenguaje]

Recommended Posts

PDFCreator 4.0.4/2.5.3[Desatendido][Multilenguaje]
180623063237508104.png
PDFCreator  es una aplicación gratuita, diseñada originalmente como una impresora PDF pero que, con el paso del tiempo, se ha convertido en una completa herramienta de creación y edición de documentos PDF. Gracias a esta aplicación vamos a poder crear fácilmente nuestros propios PDF, convertir nuestros documentos y nuestras fotografías a este formato de documento y, además, protegerlos con un cifrado AES de 128 bits para evitar accesos no autorizados al mismo y proteger así nuestra información.
Esta herramienta, además de sus funciones básicas, nos permite también editar cualquier documento PDF con total facilidad utilizando para ello la herramienta PDF Architect, también de los mismos desarrolladores.
Crea archivos PDF
Si puede imprimir su documento, puede convertirlo a PDF con nuestra aplicación gratuita PDFCreator. Y no solo PDF, también puede convertir el documento a otros formatos populares, como PNG, JPEG y TIF.
Asegure sus archivos PDF
PDFCreator permite proteger sus documentos contra el acceso no autorizado o modificaciones. Puede restringir el acceso a sus archivos PDF, solicitar una contraseña para abrir el documento o restringir la impresión y modificación de su documento con un cifrado AES de hasta 256 bits.
Firmas digitales
Si necesita firmar un documento y enviarlo a todo el mundo, lleva mucho tiempo. Puede usar firmas digitales para acelerar este proceso: Firme el documento digitalmente con PDFCreator. Esto lo verifica como autor y no tendrá que imprimir y escanear el documento.
Listo para archivo con PDF / A
Hoy en día, la mayoría de las personas y las empresas desean archivar documentos durante años o décadas y debe asegurarse de que sean legibles cuando los necesite. El estándar PDF / A garantiza esto mediante la aplicación de estándares estrictos sobre lo que puede y debe incluirse en el PDF. PDFCreator puede crear archivos PDF / A para sus necesidades de archivo.
Utilice perfiles para acceder fácilmente
Si tiene diferentes casos en los que utiliza PDFCreator, es posible que necesite diferentes configuraciones para cada uno. PDFCreator tiene perfiles para esto. Puede crear un perfil para cada situación y tenerlo disponible con un solo clic. También puede tener múltiples impresoras PDFCreator y definir qué perfil se preseleccionará para usted.
Ahorro automático
El guardado automático le permite tener una impresora PDF totalmente automatizada. Active el guardado automático en su perfil y seleccione dónde se guardarán los archivos. Cada documento que imprima se guardará automáticamente. Combínalo con fichas y se vuelve aún más poderoso.
Fichas
PDFCreator admite tokens en muchos lugares. Estos tokens son marcadores de posición para ciertos valores, por ejemplo, la fecha de hoy, su nombre de usuario o un contador que aumenta cada vez que imprime un documento.
Fusionar y reorganizar
En lugar de convertir sus PDF uno por uno, también puede recopilar varios documentos, reorganizar su orden y fusionarlos. Luego recibirá un PDF que contiene todos sus documentos en un solo archivo.
Comportamiento
Las acciones te permiten ir aún más lejos. Puede agregar portadas a su documento, cargar sus archivos a través de FTP, enviar un correo electrónico o incluso llamar a su propio script personalizado para procesar aún más los archivos.
Interfaz COM
PDFCreator viene con una interfaz COM que le permite controlarlo desde su aplicación o script. Puede esperar un trabajo de impresión, definir dónde se guardará, combinarlo con otros trabajos de impresión y mucho más. Hasta donde sabemos, ningún otro programa gratuito de conversión de PDF le permite llegar tan lejos.
20041712531974230.jpg
200417125323826907.jpg
Plurilingüe
PDFCreator está disponible en muchos idiomas diferentes ya que tenemos una gran comunidad de traductores. En caso de que su idioma no esté disponible, puede considerar convertirse en traductor. Vaya a translate.pdfforge.org y traduzca PDFCreator a su idioma.
Gratis y OpenSource
PDFCreator es y seguirá siendo freeware. Y aún más: es de código abierto. Puede descargar el código, modificarlo y crear su propia aplicación a partir de él, siempre que otorgue a sus usuarios los mismos derechos que ha recibido.
¿De qué tipo de acciones estamos hablando? Son las mismas acciones que conoce de sus Perfiles, por ejemplo, Modificar, Enviar y Seguridad. Puede optar por seguir trabajando con ellos de la manera anterior, o activar la función de orden personalizado y arrastrarlos en el orden en que desea que se ejecuten
PDFCreator 4.0 también viene con una nueva configuración. Es mucho más rápido y fácil de navegar con menos clics, por lo que puede pasar directamente a todas las funciones útiles que este convertidor de PDF tiene para ofrecer.
▬▬ஜ۩۞۩ஜ▬▬** What´S NeW / UpdateS / ChangE LoG **▬▬ஜ۩۞۩ஜ▬▬
What’s new in PDFCreator?
Mejoras
PDFCreator ahora utiliza Ghostscript 9.50
Errores corregidos
Se ha corregido un error que podía producirse al arrastrar tipos de archivos desconocidos a PDFCreator
Se ha corregido el contenido de corte al imprimir en papel
Se ha corregido un error que se producía al estampar con otras modificaciones, por ejemplo, añadir una cubierta o un archivo adjunto
Si los enlaces de share de Dropbox se colocan en un correo electrónico, pero la acción de Dropbox se colocó después de enviar el correo, PDFCreator ahora adjunta los archivos
Otros cambios
Algunos archivos de configuración temporal es no se eliminaron
181118030539436744.jpg
200417125324685017.jpg
PDFCreator 4.0.4 Legacy  Final Stable[Desatendido] [Multilenguaje] 29.6 Mb  
OS :  Windows 7 (32/64 bit), Windows  8/8.1 (32/64 bit),Windows: 10 (32/64 bit)


 

Quote

 

 

 


pdfcreator_free.png
PDFCreator 2.5.3.6324 Stable[Desatendido] [Multilenguaje] 24.9 Mb  [/font]
OS : Windows:registered: XP SP3, Windows Vista:registered: (32/64 bit), Windows:registered: 7 (32/64 bit), Windows:registered: 8/8.1 (32/64 bit),Windows:registered: 10 (32/64 bit)

 

Quote

 

 

Edited by geodasoft

Share this post


Link to post
Share on other sites

W

 

pdfcreator_free.png
PDFCreator 2.5.3.6324 Stable[Desatendido] [Multilenguaje] 24.9 Mb  [/font]
OS : Windows:: XP SP3, Windows Vist: (32/64 bit), Windows: 7 (32/64 bit), Windows:: 8/8.1 (32/64 bit),Windows:registered: 10 (32/64 bit)

Quote
Edited by geodasoft

Share this post


Link to post
Share on other sites

PDFCreator 3.1.0

Released 2017-12-19

Improvements

  • Quick actions: After converting a file, you can now optionally perform actions like opening the file or sending a mail. You can configure if you want to see this screen.
  • File history: PDFCreator shows a list of the most recently converted documents and allows you to open or send these files.
  • PDFCreator Plus, Business and Terminal Server: Notifications for auto-save: When converting a file in auto-save mode, you can now optionally get a notification in the tray area. This can be configured to be shown on successful and failed jobs or just for failed ones.
  • Command line: PDFCreator now accepts command line parameters to set the output file and the profile
  • It is now possible to confirm the save dialog with the enter key
  • User tokens in text fields now are shown in the preview with temporary values
  • The E-Mail actions now support CC and BCC fields as well
  • The timeout for the HTTP action can be configured now
  • Tokens are now available in the PDF signature fields Reason, Location and Contact
  • PDFCreator now uses Ghostscript 9.22 and (in the free version) iText 5.5.12

Bugs fixed

  • PDFCreator is now able to invoke a print job for a lot more file formats, even if a UWP App is registered as default viewer
  • Title replacement: Searching and replacing text is now case-insensitive
  • After loading settings from ini files, the settings could not be saved anymore
  • Under certain circumstances, a runtime error could happen during the setup
  • PDFCreator Terminal Server: Under some circumstances, the activation service could not be installed successfully
  • PDFCreator Plus, Business and Terminal Server: When a connection to the license server is not possible, PDFCreator sometimes could delete a valid activation
  • PDFCreator Business and Terminal Server: When uninstalling the MSI setup, there could be an error under certain circumstances that would cause the MSI to abort and perform a rollback, which would install PDFCreator again
  • Thanks to your error reports, we could fix some additional bugs

Known issues

  • Ghostscript 9.22 does not always produce valid PDF/A files. As the previous Ghostscript version we used (9.19) had problems with special characters in paths, we had to upgrade the version. This only affects PDFCreator Free. In PDFCreator Plus, Business and Terminal Server, we are able to fix the issues with a commercial library we are using.

Geodasoft.gif

Share this post


Link to post
Share on other sites

PDFCreator 3.1.1

Released 2018-01-05

Bugs fixed

  • When updating the translations for PDFCreator 3.1.0, as few languages were accidentally removed and have been added again
  • Assigning the last used profile to a printer did not always work
  • When changing the profile in the print job window, the output folder could be set to empty if it was not configured in the selected profile
  • If the filename or folder contained illegal characters, an error was raised when clicking the browse button (...) in the print job window

Share this post


Link to post
Share on other sites

PDFCreator 3.2.0

Released 2018-03-15

Improvements

  • Set own default viewer to open document after conversion
  • PDFCreator Plus, PDFCreator Business and PDFCreator Terminal Server: Click on a successful auto-save notification to open file folder
  • PDFCreator Terminal Server: Allow to configure a proxyserver for the license service
  • Drag & drop folders to convert all files
  • Tokens for cover, background and attachment
  • Detect too long paths, invalid characters and invalid absolute paths in profile settings
  • Display creation date in file history overview

Bugs fixed

  • Prevent crash during uninstallation if spool folder is not empty
  • Prevent crash of PrinterHelper.exe on update
  • The auto-save notifications always took the settings from the default profile

Known issues

  • Ghostscript 9.22 does not always produce valid PDF/A files. As the previous Ghostscript version we used (9.19) had problems with special characters in paths, we had to upgrade the version. This only affects PDFCreator Free. In PDFCreator Plus, Business and Terminal Server, we are able to fix the issues with a commercial library we are using.

Share this post


Link to post
Share on other sites

PDFCreator 3.2.1
Released 2018-05-31

Important announcement
From now on silent installation is only available for PDFCreator Business, PDFCreator Terminal Server and PDFCreator Custom
Bugs fixed
PDFCreator Plus, PDFCreator Business, PDFCreator Terminal Server and PDFCreator Custom: Downloading the update could have crashed if the download was performed multiple times
PDFCreator Plus, PDFCreator Business, PDFCreator Terminal Server and PDFCreator Custom: The setup was not able to detect that HotFolder was still running, which made an update installation fail
Fixed a bug that would declare lower case driver letters in paths as invalid (i.e. ‘c:Temp’)
When using the E-Mail button, PDFCreator validated the target path even though it was not used
QuickActions do not reset for bug fix releases

Share this post


Link to post
Share on other sites

Other improvements in PDFCreator 3.3.0

According to the request of users to extend the Group Policy settings, now it’s possible to disable the Accounts tab and the introduction Window that is shown after an installation or update.

Similarily, you can make more settings in the registry. The time PDFCreator will wait to print a file (Drag&Drop or Command line), can now be changed under

HKEY_CURRENT_USER\\Software\\pdfforge\\PDFCreator\\Settings\\ApplicationSettings\\ConversionTimeout

There is a new command line parameter /Merge you can specify multiple PDF and PS files that will be merged into a single print job and then converted by PDFCreator.

Bugs fixed

  • Added a workaround for a bug in .Net that would raise an error while ending the application (TaskCanceledException), even though everything worked fine
  • Fixed a bug that would declare lower case driver letters in paths as invalid (i.e. 'c:\Temp')
  • When using the E-Mail button, PDFCreator validated the target path even though it was not used
  • PDFCreator Plus, PDFCreator Business and PDFCreator Terminal Server: The setup was not able to detect that HotFolder was still running, which made an update installation fail
  • PDFCreator Plus, PDFCreator Business and PDFCreator Terminal Server: Downloading the update could have crashed if the download was performed multiple times
  • Fixed a bug that could show an error message (NotSupportedException) during the first start of PDFCreator
  • The ouput path was not correctly set when changing the profile during a print job
  • PDFCreator Business and PDFCreator Terminal Server: GPO for application settings does not influence the printer tab anymore
  • (Ready to Merge) The command line parameters /Printer, /Profile and /OutputFilename can now be used when converting PDF and PS files (see :ref:`CommandLineParameters`:)

Other Changes

  • Announcement: From now on silent installation is only available for PDFCreator Business and PDFCreator Terminal Server.
  • PDFCreator now asks to collect anonymous usage statistics to improve the further development. This feature respects your privacy and completely optional. Users will be informed transparently when the application is started for the first time.
 

       

Share this post


Link to post
Share on other sites

PDFCreator 3.3.2

  • Fix NullReferenceException while launching PDFCreator caused by unnamed printer ports
  • When a different profile is selected in the print job view, the filename and folder are set accordingly
  • Fix translation of the context menu entry
  • Avoid error caused by too long file paths during direct conversion of PS and PDF files
  • Fixed linking PDFCreator with new Dropbox account
  • Fix error when PDF/A validation report was active and the output format is not PDF/A
  • Ignore empty profile names to ensure a proper profile assignment
  • Fix a rare problem with hanging print jobs on terminal servers
  • Fix the manual JPEG Q-Factor

Share this post


Link to post
Share on other sites

Full Change Log

Improvements

  • PDFCreator Business, PDFCreator Terminal Server and PDFCreator Custom:  Share settings via ini file in ProgramData folder
  • PDFCreator Plus, PDFCreator Business and PDFCreator Terminal Server:  New updates are starting to download immediately when they are available to reduce waiting time
  • Stay up to date with our new news feed in the home tab
  • A new overview to see all the changes made in the recent updates before installing
  • Option to open recently converted documents in the print view of PDF Architect
  • Added new tokens for paths to Desktop, MyDocuments and MyPictures.
  • PDFCreator now supports PDF/A-3b
  • Simplified setting of visible signature via position, width and height
  • Every password field now has an eye symbol that can be pressed to see the password in clear text


Other Changes

  • Mark features that are not supported by the selected output format
  • Redesign the about section to make it easier for you to find help or help yourself
  • Redesign of the error report window

Share this post


Link to post
Share on other sites

▬▬ஜ۩۞۩ஜ▬▬** What´S NeW / UpdateS / ChangE LoG **▬▬ஜ۩۞۩ஜ▬▬
What’s new in PDFCreator?

Our PDFCreator 3.4.1 maintenance release brings you the installer for the brand new PDF Architect 7 and comes with the following bug fixes:

  • Fixed a bug in parsing user tokens with a certain argument in the PS file
  • The profile list is now sorted alphabetically
  • Installing printers could fail without message under certain circumstances
  • Fixed some cases where HTML Signatures could be overwritten when using the mail client action
  • License will be updated immediately after activating
  • When dragging files to convert into the UI, the drop zone will be visible
  • The filename was not saved when confirming the print dialog with the enter key
  • The UI now updates correctly when the switching the modify background setting on or off
  • Job History now properly updates when reseting the settings

 

Share this post


Link to post
Share on other sites

Changes in PDFCreator 3.5.0

Improvements

  • Add drop-down buttons in print job view for quick access to several functions
  • It is now possible to send a converted file via email, SMTP, FTP or similar without specifying a target directory
  • When entering a password, the user immediately receives feedback regarding the password strength
  • PDFCreator now ships with PDF Architect 7
  • PDFCreator Business, PDFCreator Terminal Server and PDFCreator Custom: There is now a GPO setting to disable the History

Resolved issues

  • Error that occurs when trying to convert a secured PDF in auto-save mode will not clog application
  • Fixed a bug in parsing user tokens with a certain argument in the PS file
  • Installing printers could fail without message under certain circumstances
  • Fixed some cases where HTML Signatures could be overwritten when using the mail client action
  • License will be updated immediately after activating
  • The UI now updates correctly when switching the modify background setting on or off
  • Job History now properly updates when resetting the settings
  • PDFCreator now uses the operating system‘s display language as default. Previously it would use the language from the regional settings
  • If PDFCreator can‘t detect the default PDF viewer, but PDF Architect is installed, PDF Architect will be used to open the PDF file
  • Fixed an error that could appear when closing the application
  • When the merge window was opened, incoming print jobs could be added and processed twice

Other Changes

  • Added a new default profile with full encryption and password protection activated
  • The user receives a clearer answer as to whether the entered certificate password is valid
  • PDFCreator can repair PDFCreator printers during an update if necessary

Share this post


Link to post
Share on other sites

Changes in PDFCreator 3.5.1:

  • PDFCreator Business and PDFCreator Terminal Server: Fix setting passwords if print dialog is skipped
  • The lost <Last used profile> printer mapping is recovered
  • “Save” is the preselected button in the print job window to proceed immediately by pressing enter
  • After editing profiles, the print job window sets the last edited profile
  • Fixed navigation to profiles tab from “Edit” in the print job window
  • Fix an error that could happen when printing a lot of files from the context menu
  • Fix “Don’t show quick Actions until the next update” which sometimes wasn’t applied

Share this post


Link to post
Share on other sites

PDFCreator 4.0.4 - Maintenance Release

Posted: April 16, 2020

We've released our maintenance release PDFCreator 4.0.4! Here's what's new:

Improvements

  • PDFCreator now uses Ghostscript 9.50

Bugs fixed

  • Fixed an error that could occur when dragging unknown file types to PDFCreator
  • Fixed cut off content when printing to paper
  • Fixed an error that occured when stamping with other modifications, e.g. adding a cover or attachment
  • If Dropbox share links are placed in an e-mail, but the Dropbox action was placed after sending the mail, PDFCreator now attaches the files

Other changes

  • Some temporary setup files were not removed

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...