Jump to content

[Script] IntelliPoint/Type Pro v8.20.468


ricktendo

Recommended Posts

kbmjp4.png

Microsoft IntelliPoint + IntelliType Pro v8.20.468 (silent switch makers)

Info: Builds custom silent switch installers for Microsoft Mouse and Keyboard hardware drivers/software. Detailed instructions are in the Readme.docx/pdf/xps

tabdownload.pngXP, Vista, 7 x86 English

http://adf.ly/1713566/msmousekb

Size: 16.3 MB

MD5: a2054e5d0f7aa3bf60cadeb63b988d7e

Website: http://www.microsoft.com/hardware/mouseand...rd/default.mspx

Changelog:

May 27-11

- Updated IP program/drivers to v8.15.406.0

- Added new mouse/keyboard command-line # to Readme DOCX, RTF, PDF and XPS

Sep 5-10

- Updated IP program/drivers to v8.0.225.0

- Added new mouse/keyboard command-line # to Readme DOCX, RTF, PDF and XPS

Mar 13-10

- Updated IP program/drivers to v7.10.344.0

- Added 3 new mouse command-line # to Readme DOCX, PDF and XPS

Jan 22-10

- Updated ITP program/drivers to v7.10.344.0

- Added 2 new keyboard command-line # to Readme DOCX, PDF and XPS

Jun 20-09

- Updated program/drivers to v7.00.260.0

- Added new keyboard command-line # to Readme DOCX, PDF and XPS

Apr 23-09

- Removed TRANSFORMS commandline and added /norestart

Apr 21-09

- Updated program/drivers to v6.31.258.0

- Removed some useless files from the installer

- Added Readme DOCX and XPS formats in addition to the PDF

- Added new keyboard/mouse command-line # to Readme DOCX, PDF and XPS

Sep 10-08

- Updated program/drivers to v6.30.192.0

- Added new keyboard/mouse command-line # to Readme PDF

Link to comment
Share on other sites

  • 2 weeks later...
  • 4 months later...

I am assuming this addon is made for the XP x86-32 operating system. How hard would it be to prepare an installer for the XP x86-64 OS?

Back when I was using 32 bits, I loved this "instructional" installer. I just hope there is one available for 64 bits.

Link to comment
Share on other sites

IDK but I think if you 7zip the x64 version the same installer files (extract them from the installer) you can create a x64 version with the same x86 installer builder

Look in the xml to see if the command line switches for the different KB/MM models are the same as the x86 ones, should not be to hard to figure it out

Link to comment
Share on other sites

The problem with using a 32-bit installer setup is that it tends to put the files in the wrong location due to the WOW64 redirection. Even if the files (in this case some hardware driver stuff) are 64bit, using a 32bit install process redirects those files to the wrong location. This is how it was explained to me over at RyanVM.net.

If there is a physical x64 bit executable that will do the same thing as your x32 bit executable above, I can use it. However I am going to work with what I believe to be an alternative way to make it all work.

Everything has to be extracted from the original MS executable. It contains several directories. Assuming the "updates" are already installed, one can just take the ipoint (or itype) directory and use the .MSI installer from that directory (with the appropriate parameters). Yes the MM and KB option would still apply to the MSI file. If you also use the /qn option, it installs silently. So in the end, I figured out a way to still make it work. Now I just need to test it on a standard install. I will let you know how it goes.

Link to comment
Share on other sites

Look crashfly the addon builder will work the same for x64 as it it does for x86, it has nothing to do with the installer putting files "in the wrong location due to the WOW64", this is handled by the MSI

So if you just look at the 32 bit installers 7ip file you can see what files are needed, then you extract the x64 installer and 7zip those same files, now you build your silent switch intaller with the x64 files using my 7zip sfx and config.txt

The 7zip sfx works with both installers, the only thing that matters is whats inside the 7zip file

Link to comment
Share on other sites

  • 2 months later...
  • 3 weeks later...

Thanks for the heads up Uncle Gadget

- Updated program/drivers to v6.31.258.0

- Removed some useless files from the installer

- Added Readme DOCX and XPS formats in addition to the PDF

- Added new keyboard/mouse command-line # to Readme DOCX, PDF and XPS

Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...
  • 2 months later...
  • 2 months later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...