Jump to content

DPS Finishier time chang


rebi

Recommended Posts

i want to change the Driver Pack Finisher that start in the first log on of windows

i want to switch it in the installing of windows time . how can i do that >

post-20938-127246946055_thumb.jpg

Edited by rebi
Link to comment
Share on other sites

DP Finisher will want run every time you create a new user account and log into it for the first time...BTW if you still want to know look at my Windows Sidebar, I do it with that

; Registers the Sidebar's EXE and DLL files on 1st user login
[PerUserStub.AddReg]
HKLM,"SOFTWARE\Microsoft\Active Setup\Installed Components\{D58F39FF-953E-4F45-898F-59F243B9A523}",,,"Windows Sidebar"
HKLM,"SOFTWARE\Microsoft\Active Setup\Installed Components\{D58F39FF-953E-4F45-898F-59F243B9A523}","ComponentID",,"sidebar.EXE"
HKLM,"SOFTWARE\Microsoft\Active Setup\Installed Components\{D58F39FF-953E-4F45-898F-59F243B9A523}","IsInstalled",0x10001,1
HKLM,"SOFTWARE\Microsoft\Active Setup\Installed Components\{D58F39FF-953E-4F45-898F-59F243B9A523}","Locale",,"en-US"
HKLM,"SOFTWARE\Microsoft\Active Setup\Installed Components\{D58F39FF-953E-4F45-898F-59F243B9A523}","StubPath",0x20000,"RUNDLL32 advpack.dll,LaunchINFSection %INF_FILE%,Register"
HKLM,"SOFTWARE\Microsoft\Active Setup\Installed Components\{D58F39FF-953E-4F45-898F-59F243B9A523}","Version",,"6,0,6002,18005"

You need to generate a GUID and change the StubPath to launch DP Finisher

Link to comment
Share on other sites

  • 1 month later...

Why aren't you asking this question over at DriverPacks.net forums? Are you afraid of us? ;)

Did you select to run the finisher at GUIrunonce or RunOnceEx? If RunOnceEx, then change the number found in %source%\$OEM$\cmdlines.txt

[Commands]
"ROE.exe 937"

Change the 937 to any number between 10 and 999. Any number will do, but make sure it doesn't conflict with your other apps executing during RunOnceEx.

For more info on ROE, read here: http://unattended.msfn.org/unattended.xp/view/web/14/

Link to comment
Share on other sites

- i am sure nobody like my question or request

- any way if i you would like help me or another people the first step is be friendly response ...

- i will test it .

- so if i found it i will show in here

i use %OEM%cmdlines

;

; Generated by DriverPacks BASE 8.12.5

;

[Commands]

"ROE.exe 937" ====>> the first time of login i see the picture i said .

when time is good ? id didn,t andd app in cmline

i chang it too 300 ... how can i know 300 is between winch time of installing :questionmark:

Edited by rebi
Link to comment
Share on other sites

That's because there are only two options. GUIrunonce or RunOnceEx. Both occur at roughly the same time. ROE is better (in my opinion). GUIrunonce requires entries in the winnt.sif, which is not used by everyone.

If you have entries in BOTH GUIrunonce and RunOnceEx, they will both execute at the same time and cause problems.

EXACTLY when do you wish to execute the finisher? Ricktendo64 already explained how to execute it during first user login.

Link to comment
Share on other sites

1- RunOnceEx

2- EXACTLY when do you wish to execute the finisher? ===>> in the 13 minute Before installing Svpack ,if it is possible

3- exactly not in the first logon

Edited by rebi
Link to comment
Share on other sites

1- RunOnceEx

2- EXACTLY when do you wish to execute the finisher?

===>> in the 13 minute Before installing Svpack ,if it is possible

post-20938-127606802388_thumb.jpg

3- exactly not in the first logon

Edited by rebi
Link to comment
Share on other sites

To answer your question...no. That's not possible.

Not all the installers in every DriverPack are compatible with being installed at T-13, but all are ROE compatible.

If you want to test, add the following line to \i386\svcpack.inf

[SetupHotfixesToRun]
%SystemDrive% & cd\ & Start /wait /separate /high "" DPsFnshr.exe

I haven't tested this, but I'm 90% certain that it will fail.

Don't blame me if this smokes your install, melts your ice-cream or turns your cat purple. ;)

Edited by Mr_Smartepants
Link to comment
Share on other sites

Mr_Smartepants

yes you say it i remember , it is a bad problem , i see the dpsfinisher time in windows of my friend that created it

he change this time to 13 minutes of picture that i showed it just this pic run , i did not know how can he do it ?

but i think he use a program for doing that . i see just this pic in time

something like this :

post-20938-127643070686_thumb.jpg

Link to comment
Share on other sites

Mr_Smartepants

do i write the text in cmdlines :questionmark:

[setupHotfixesToRun]

%SystemDrive% & cd\ & Start /wait /separate /high "" DPsFnshr.exe

i see xplode mode in dps finisher time . did you know the using of it ?

Link to comment
Share on other sites

It sounds like you don't understand what you're doing. :icon_cool:

You need to first understand what cmdlines.txt and svcpack.inf are used for.

First read: http://unattended.ms...xp/view/web/14/

Next read: http://unattended.ms...xp/view/web/24/

you don't understand what i said . you give me this text and it is in svpack

i know different of those . just i ask you if i add text in cmdline of (roe) is it right or no :ranting:

i see xplode mode in dps finisher time . did you know the using of it :questionmark:

Edited by rebi
Link to comment
Share on other sites

Appearently you don't know the difference because this:

[SetupHotfixesToRun]
%SystemDrive% & cd\ & Start /wait /separate /high "" DPsFnshr.exe

IS NOT cmdlines-style coding...

This:

[COMMANDS]
"VisualStyles.exe"
"Customfiles.exe"
"Fonts.exe"
"renuser.exe Administrator Kelsenellenelvian"
"rundll32 advpack.dll,LaunchINFSection RunWPI.inf,,1,N"

is cmdlines-style coding...

Link to comment
Share on other sites

[SetupHotfixesToRun]
%SystemDrive% & cd\ & Start /wait /separate /high "" DPsFnshr.exe

when i use it in [setupHotfixesToRun] it did not mater used in cmdline ?

ok i got it what you say man :rolleyes:

Link to comment
Share on other sites

  • 7 months later...

for along time i cam back

i use driver pack of http://driverpacks.net/ and its so good for my windows

i use integrating hot fix of XPSP3_QFE_UpdatePack for Windows XP Post-SP3 1.4.7 20110111

really good and excellent

just those time i see the driver pack finisher in the first log in of windows

i file xplode soft to change the time of that

just i did not know how can i do use this xplode

if any body can help me ?

Link to comment
Share on other sites

i file xplode soft to change the time of that

just i did not know how can i do use this xplode

if any body can help me ?

No. You cannot decompile (or "xplode" as you say it) the DPS Finisher. The source code is compiled (or built) into an .exe file.

Besides, you cannot alter the source code to change the time that it executes. It doesn't work like that.

We've all tried to explain it to you several times. To change the time that the Finisher runs, you have to "call" it from different files using different methods.

You must call the Finisher from either GUIRunOnce or RunOnceEx using the methods built into the DPS BASE.

ANY other method is NOT supported and will probably fail (unless you know exactly what you are doing, which you don't).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...