feeliks83

I solved it by creating another partition on the USB stick Extracted the whole .ISO on the partition and boot it with this grub4dos entry title Trinity Rescue Disc \Mapped and Booted from Partition sdb2 map (hd0,1)+1 (fd0) map --hook root (fd0) chainloader +1 boot Maybe someone have a tough time with it like me and this helps him Danke nochmal Thiersee für den tip mit WinSetupFromUSB Ich habe jetzt mal Windows installiert und alles hat funktioniert wie gewollt Thanks again Thiersee for the tip with WinSetupFromUSB I installed windows now and everything worked fine as I wanted :dancing: Edit 1: I renamed the stick to TRK_3-4 I forgot (what didn´t work on the first partition)

No Problem But the chance was there... I think I´ll get the other ones booting too..just need some time Now everything except trinity rescue disc is working.. I get this error msg..from usb..the CD I created workes fine.. Tryiing to find TRK on your 1 CD-drive(s) TRK not founs on CD, checking harddisks and USB sticks ... cat: /etc/trkhd: No such file or directory Seems we didn't find anything yet. Trying CD-drives once more Trying to find TRK on your CD-drive(s) Seems we didn't find the TRK medium Manually enter the device on which TRK can be found (e.g. sda1):

I checked it out The most of my wanted .iso or copied files are working (I´m using a usb 3.0 NTFS formated stick) Here´s the complete list ubuntu-12.04-desktop-amd64.iso #working backbox-2.05-amd64 #working BT5R3-GNOME-64.iso #working clonezilla-live-20120620-precise.iso #working gparted-live-0.13.1-2.iso #working Hiren's.BootCD.15.1.GR.Keyboard.iso #working kav_rescue_10.iso #working now! -> I created a other usb stick with the help of the Utility to record Kaspersky Rescue Disk 10 to USB devices looked for the entrys and changed them a little. ocz-tools-3.20.4.iso # working trinity-rescue-kit.3.4-build-372.iso #not working -> manually enter the device on which TRK can be found..If I enter the device there isn´t found anything ubcd511.iso #working Here´s my menu.lst color black/cyan yellow/cyan timeout 10 default /default #graphicsmode 0x6A graphicsmode -1 640 480:800 24:32 || graphicsmode -1 ## Menu AutoNumber write 0x8274 0x2001 #graphicsmode -1 800:640 -1 24:32 || graphicsmode -1 #font /unifont.hex.gz title Installiere Windows 7 map --unmap=0:0xff map --unhook && map --rehook root (hd0,0) ls /bootmgr > nul || find --set-root --devices=hf /bootmgr > nul chainloader /bootmgr savedefault +2 title Installiere Windows 7 DEBUG map --unhook map --unmap=0:0xff && map --rehook savedefault +1 ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag > nul configfile /vistastp.lst title Nach Neustart Boot erste Festplatte falls der USB Stick gebootet wurde map --unhook map --unmap=0:0xff && map --rehook savedefault ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat /shifthd.bat if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lst pause --wait=3 Booting MBR on hd0 ... chainloader (hd0)+1 title - Linux Versionen root title Ubuntu 12.04 without installing background /multiboot/ubuntu1204/isolinux/splash.png kernel /ISO/Ubuntu12.04/casper/vmlinuz append cdrom-detect/try-usb=true noprompt boot=casper floppy.allowed_drive_mask=0 ignore_uuid live-media-path=/ISO/Ubuntu12.04/casper/ initrd /ISO/Ubuntu12.04/casper/initrd.lz title Boot Back Box 2.0.5 (Penetration Testing) find --set-root /ISO/backbox-2.05-amd64.iso map /ISO/backbox-2.05-amd64.iso (hd32) map --hook chainloader (hd32) kernel /ISO/backbox-2.05/casper/vmlinuz file=/preseed/backbox.seed boot=casper iso-scan/filename=/ISO/backbox-2.05-amd64.iso quiet splash -- initrd /ISO/backbox-2.05/casper/initrd.gz title Backtrack 5 RC3 (Penetration Testing) kernel /ISO/BT5R3/casper/vmlinuz file=/ISO/BT5R3/preseed/custom.seed live-media-path=/ISO/BT5R3/casper boot=casper locale=de_DE.UTF-8 keyb=de textonly noprompt vga=791 i915.modeset=1 -- initrd /ISO/BT5R3/casper/initrd.gz title - Tools root title CloneZilla to backup or restore your hard drive. kernel /live/vmlinuz boot=live hostname=maverick config quiet noswap nolocales edd=on nomodeset ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" ocs_lang="" video=uvesafb:mode_option=1024x768-32 ip=frommedia nosplash initrd /live/initrd.img title gparted live find --set-root /ISO/gparted-live-0.13.1-2.iso map /ISO/gparted-live-0.13.1-2.iso (0xff) || map --mem /ISO/gparted-live-0.13.1-2.iso (0xff) map --hook root (0xff) kernel /live/vmlinuz boot=live config union=aufs noswap noprompt vga=788 ip=frommedia findiso=/ISO/gparted-live-0.13.1-2.iso toram=filesystem.squashfs initrd /live/initrd.img title Hirens Boot CD find --set-root /ISO/HBCD/HBCD/Boot/pmagic/bzImage kernel /ISO/HBCD/HBCD/Boot/pmagic/bzImage edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 vmalloc=256MiB directory=/ISO/HBCD/HBCD/Boot keymap=%lang% %opt% initrd /ISO/HBCD/HBCD/Boot/pmagic/initramfs title Kaspersky Rescue-CD find --set-root --ignore-cd /rescue/rescueusb.iso map /rescue/rescueusb.iso (0xff) || map --mem /rescue/rescueusb.iso (0xff) map --hook chainloader (0xff) boot title run ocz-tools-3.20.4.iso kernel /ISO/ocz/boot/vmlinuz edd=off load_ramdisk=1 prompt_ramdisk=0 rw nomodeset nosshd nobluetooth nosmart numlock=on loglevel=9 max_loop=256 vmalloc=256MiB blacklist=nouveau initrd /ISO/ocz/boot/core.gz title Trinity Rescue v3.4 # You must set the drive volume label on the next line set VOL=MULTIBOOT configfile /trk/menu.lst Trinity menu.lst echo PLEASE CHECK THIS DRIVE'S VOLUME LABEL = %VOL% (or you will get an error!) debug -1 pause --wait=4 debug on title 0 : Run Trinity Rescue Kit 3.4 (default mode, with text menu) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 1 : TRK 3.4 in failsafe mode (No menu, VGA, noacpi, noapic) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose acpi=off noapic pci=conf1 vga=1 vollabel=%VOL% initrd /trk/initrd.trk title 2 : TRK 3.4 running from RAM (best >= 512mb, 256mb min) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 trkinmem trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 3 : TRK 3.4 - Run 'mclone' in client mode (!) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 mclone vollabel=%VOL% initrd /trk/initrd.trk title 4 : TRK 3.4 in simple VGA mode (debugging of kernel output) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=1 pci=conf1 splash=off trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 5 : TRK 3.4 with Belgian keyboard (use menu for other) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 keyb_be trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 6 : TRK 3.4 - Virus scan all drives (Clamav, non interactive) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 virusscan vollabel=%VOL% initrd /trk/initrd.trk title 7 : TRK 3.4 - Try more pcmcia and usb nics (when not detected) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 pcmcia trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 8 : TRK 3.4 - Try more SCSI drivers (when disks not detected) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 scsidrv trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 9 : TRK 3.4 with a secure shell server enabled kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 sshd vollabel=%VOL% initrd /trk/initrd.trk title 10: TRK 3.4 - Execute local scripts on harddrive of PC kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 locscr vollabel=%VOL% initrd /trk/initrd.trk title 11: TRK 3.4 as bootserver to boot other TRK clients kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 trkbootnet trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 12: TRK 3.4 - Fileshare all drives as guest, no security kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 smbguest trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 13: TRK 3.4 - Single user mode (no menu) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 runlevel 1 vollabel=%VOL% initrd /trk/initrd.trk title 14: TRK 3.4 - Acpi=off, noapic PCI=bios (Alternate boot 1) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose acpi=off noapic pci=bios trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 15: TRK 3.4 - Acpi=off, noapic PCI=any (Alternate boot 2) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose acpi=off noapic trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 16: TRK 3.4 - PCI=conf2 (Alternate boot 3) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf2 trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 17: TRK 3.4 - Verbose startup for debugging (no menu) kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 debugging vollabel=%VOL% initrd /trk/initrd.trk title 18: TRK 3.4 - SSH, boot- and guest fileserver, run from RAM kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 sshd trkinmem smbguest trkbootnet trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 19: TRK 3.4 - Run from RAM, run mclone as client kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 trkinmem mclone vollabel=%VOL% initrd /trk/initrd.trk title 20: TRK 3.4 with proxyserver support enabled kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 proxy trkmenu vollabel=%VOL% initrd /trk/initrd.trk title 21: TRK 3.4 - All devices set to read-only kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 allro vollabel=%VOL% initrd /trk/initrd.trk title 22: Memory tester: Memtest86+ v1.65 kernel /trk/memtest.x86 Maybe you are using one of the not working ones too and can help me I get the most working by modifying the menu.lst entrys and trying different ways to reach the goal ^^

Thank you Thiersee I´ll test it

:doh: I know now how the error message came from "windows setup could not configure windows to run on this computer's hardware" I forgot to write that I used Yumi for my USB http://www.pendrivel...ot-usb-creator/ Known Issues: * When installing Windows 8, 7, or Vista from USB, you must unplug the USB device before the first restart, otherwise you will receive an error stating: "windows setup could not configure windows to run on this computer's hardware" :doh: The solution is to unplug the USB before the first reboot (when Windows count down the restart I did unplug it) You can replug the USB when there´s the message Installation will be finished http://www.abload.de...llatioamurn.jpg Then the silent installers will finish correctly But this solution I don´t like really because I want an unattended installation.. Does anyone have a idea how to solve it else? :g: It seems like when windows is detecting the grub loader the message comes becuase that´s the only difference for my opinion..Yumi just copies the installation files to the usb..same directorys :g: I thought about using another bootloader..is it possible to create a multiboot USB with the windows bootloader? or is the windows bootloader able to boot .iso files?

The solution didn´t work really Tryed also to dismount via the dism.exe but it didn´t work..got some errors etc.. So I re-installed windows and made a single partition for wintoolkit the iso and mount files.. I don´t get any of the errors now..everything went fine..the mount folder is away as it should be Test now windows on an external drive Thanks for all the help so far )

It was there after exiting..so decided to umnount/discard the image because of another crash it didn´t work to discard..after that the folder was still there but wintoolkit didn´t recognize the mount I used now another directory for wintoolkit to prefent the error of the .txt hopefully.. but I still have the problem how to delete ^^ Exception: Tool Name: WIM Manager (1.4.0.65) Image Name: Windows 7 Professional Argument: /Unmount "C:\Test\Mount" /commit WIM File: F:\Downloads\Wintoolkit\Win7Professionalx64SP1GermanMediaRefresh\SOURCES\install.wim Mount Logging: True Drive Type: Fixed Free Space: 774.25 GB IsReady: True File Exists: True Directory Exists: True Files: Directories: *C:\Test\Mount\$Recycle.Bin *C:\Test\Mount\Documents and Settings *C:\Test\Mount\PerfLogs *C:\Test\Mount\Program Files *C:\Test\Mount\Program Files (x86) *C:\Test\Mount\ProgramData *C:\Test\Mount\Users *C:\Test\Mount\Windows Setting taskbar Progress Setting taskbar Colour Dumping Registry Detecting cause of error #1 Detecting cause of error #2 Detecting cause of error #3 Detecting cause of error #4 ImageX Tool for Windows Copyright © Microsoft Corp. All rights reserved. Version: 6.1.7601.21716 Committing: [C:\Test\Mount]... Unmount Error: Changes to the Image could not be commited. More Info: Der Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen Prozess verwendet wird. The process cannot access the file because it is being used by another process. Fixed C:\ 109.98 GB I found this solution.. http://www.microsoft...5084/en-us?fr=1

Yeah I have to make it smaller..It was easier to use all files ^^ Yes your right I´ve forgot to upload them The problem now is the folder C:\WinToolkit\Mount is still there after integration and not deleteable..I tried to unmount with DISM command but DISM do not find any mounts The error began when Win toolkit crashed.. tried Lockhunter and Unlocker to delete the directory..Lockhunter didn´t do the job and unlocker does not start

:please:

I have some mounting errors -.- http://www.mediafire.com/view/?u3s8h9ai6n8a552 http://www.mediafire.com/view/?ivvvnzo3w6z392h

The windows update? I meant how I´m able to see what´s integrated in the /source/install.wim after the integration with AIO integrator I see it in the TAB "integrated" but when I add something new to the AIO integrator I don´t see my old changes...like added drivers changed services and tweaks as also my silent installs.. when I used RT7lite I was able to see what was changed on the disk

Now everything is integrated but the silent installers aren´t installed after the installation of windows even wlan on the laptop isn´t found and when I look for the installed windows updates I don´t see them.. The unattended I created does work Is there a way to see what´s integrated in the install.wim? Drivers updates silents etc.. I forgot..the Installation did stuck at the point : das festlegen der einstellungen wird abgeschlossen windows is finalizing your settings So I just restarted the laptop and later also my computer and windows finished the installation maybe that´s the reason for the missing drivers updates and silent installs

Yes it seems like I do something basicly wrong..I made another version..with the Win 7 prof 64bit Media Refresh.iso and just black vipers tweaked services .. I also made a couple of screenshots http://www.abload.de...enshotw4lg2.jpg http://www.abload.de...nshot264x62.jpg http://www.abload.de...nshot347amb.jpg http://www.abload.de...nshot47mlh3.jpg http://www.abload.de...nshot5shz37.jpg http://www.abload.de...nshot6owa0w.jpg http://www.abload.de...nshot7l3btu.jpg http://www.abload.de...nshot85zlp8.jpg http://www.abload.de...nshot907xij.jpg http://www.abload.de...shot102ol0k.jpg http://www.abload.de...shot11l6aol.jpg http://www.abload.de...shot12eclhx.jpg http://www.abload.de...shot1318z5e.jpg http://www.abload.de...shot14c4bw1.jpg um, well..it work´s .. what I did different was I removed the ei.cfg + I didn´t created a .iso file .. just copied the files to the USB stick manually Now I´ll integrate drivers and silents hope it works.. ^^ Ok done I inegrated now all drivers but my wlan wasn´t found on my laptop even I installed them.. Is there a way to see what´s actually installed inside the install.wim? Drivers, updates silent installer etc.. to be sure everything went fine I have a Nvidia..good to know ^^ I used before also a new ISO..I removed now ei.cfg and installed it on my laptop because I don´t have an external HDD..I created a AutoUnattend.xml Yes I used it for mounting..I´ll check VirtualCloneDrive

xD .. This .iso I created now is without any changes except tweaked services

Ja ich bin deutscher..so geht das natürlich einfacher 1) Ich wollte halt alle updates integriert haben..das das so problematisch werden würde hatte ich nicht gedacht..Kam auch auf die idee mit dem Update Pack allerdings habe ich das WinFuture_7SP1_x64_UpdatePack_2.15_Juli_2012-Vollversion.exe gewählt weil ich Dr Windows bis gerade nicht kannte Das Update Pack füge ich dann als silent installer ein oder? und über die 2 Windows Updates habe ich mich dann auch erkundigt ^^ 2) meinst du in der oem0.inf? Ich wollte mir eigentlich einen USB Stick machen der Treiber und Programme integriert hat sowie ein paar Veränderungen an den Services bzw Tweaks vornehmen. Zu Win2k zeiten bzw unter Windows XP hatte ich mir auch umfangreiche Unattented CD´s gemacht..unter Vista bzw. Win7 allerdings nicht...muss doch möglich sein das ich das zum laufen bekomme Letzter Stand war jetzt das ich alles unverändert gelassen habe ausser das ich einen Treiber hinzugefügt habe mit dem Ergebnis das die gleiche fehlermeldung kommt.. Erstelle gerade nochmal eine .iso in der dann nur ein tweak verändert wurde.. Integrate 'HDC' Drivers (boot.wim) Integrate 'SCSIADAPTER' Drivers (boot.wim) Integrate 'SYSTEM' Drivers (boot.wim) Integrate 'USB' Drivers (boot.wim) und "rebuild image" hab ich mal zum testen rausgenommen Legolash konnte ja auch mit allen Tweaks bzw Services eine lauffähige Version erstellen..seltsam.. Danke für das Angebot das würde ich annehmen Yes I´m a german so this is of course easier 1) I wanted to have all updates integrated ..I didn´texpect that it would be so tricky... Had the same idea with update packages but I didn´t know dr. windows before so I choose WinFuture_7SP1_x64_UpdatePack_2.15_Juli_2012-Vollversion.exe I have to integrate the update pack as a silent install or? and I informed me about the 2 windows updates 2) Do you mean the oem0.inf? I wanted to create a usb stick within some programs and updates + changed services and tweaks In the time of Win2k and Windows XP I also created extensive Unattented CD's . Under Vista or Win7 not yet ... must be possible for me to create this Last .iso I created was untouched with the exception of one driver I have added a driver with the same result I get the same error Create again one .iso where I changed just one tweak..nothing else Integrate 'HDC' Drivers (boot.wim) Integrate 'SCSIADAPTER' Drivers (boot.wim) Integrate 'SYSTEM' Drivers (boot.wim) Integrate 'USB' Drivers (boot.wim) and "rebuild image" I did uncheck to test it Legolash was also able to create a version within all tweaks or services..strangely #update also with just one tweak it didn´t work..um..well.. Thanks for the tender I would accept this Sorry for writing just german..didn´t sleep much ^^