Legolas

Ok i found the Problem (After 6 Weeks and hundrets of Posts and many Tests :doh: ) I have the Pre Boot Driver of AHCI in the BIOS disabled and now tataaaaaaa installation is going on without a Message :dancing: But why ? Can anyone explain please ? Edit: Ok i found something by myself (it seems that if i integrate the Driver in Boot.wim the BIOS will take and so the installation of Driver of the OS will break ) xHCI Pre-Boot Driver Enabled The USB 3.0 ports are routed to the xHCI controller before booting to OS. (Default) Disabled The USB 3.0 ports are routed to the EHCI controller before booting to OS. When this item is set to Enabled, the xHCI Mode below will be automatically set to Smart Auto; when this item is set to Disabled, the xHCI Mode below will be automatically set to Auto. xHCI Mode Allows you to determine the operating mode for the xHCI controller in OS. Smart Auto This mode is available only when the BIOS supports the xHCI controller in the pre-boot environment. This mode is similar to Auto, but it adds the capability to route the ports to xHCI or EHCI according to setting used in previous boots (for non-G3 boot) in the pre-boot environment. This allows the use of USB 3.0 devices prior to OS boot. xHCI controller enabling and rerouting should follow the steps in Auto, when previous boot routs ports to EHCI. Note: This is the recommended mode when BIOS has xHCI preboot support. (Default) Auto BIOS routes the sharable ports to EHCI controller. Then it uses ACPI protocols to provide an option to enable the xHCI controller and reroute the sharable ports. Note: This is the recommended mode when BIOS does NOT have xHCI pre-boot support. Enabled All shared ports are eventually routed to the xHCI controller during the BIOS boot process. If BIOS does not have pre-boot support for the xHCI controller, it should initially route the sharable ports to the EHCI controller and then prior to OS boot it should route the ports to xHCI controller. Note: OS has to provide support for the xHCI controller in this mode. If the OS does not provide support, all sharable ports won't work. Disabled The USB 3.0 ports are routed to the EHCI controller and the xHCI controller is turned off. All USB 3.0 devices function as High Speed devices regardless of xHCI software support/availability. If this item is set to Disabled, the HS Port #1/2/3/4 Switchable and xHCI Streams items below will become unconfigurable. Another explanation: "Smart Auto This mode is available only when the BIOS supports the xHCI controller in the pre-boot environment. This mode is similar to Auto, but it adds the capability to route the ports to xHCI or EHCI according to setting used in previous boots (for non-G3 boot) in the pre-boot environment. This allows the use of USB 3.0 devices prior to OS boot. xHCI controller enabling and rerouting should follow the steps in Auto, when previous boot routs ports to EHCI. Note: This is the recommended mode when BIOS has xHCI pre- boot support." The on-board USB 3.0 port function like a 2.0 port before OS USB 3.0 driver load. If you reboot the OS, during this reboot BIOS phase, BIOS is "Smart" enough to avoid downgrade the USB 3.0 port back to 2.0 functionality before OS USB 3.0 driver load. So Smart Auto is faster than Auto on 2nd boot onward.

Hi to all. I have a Problem with my Laptop: I try to integrate my Intel USB 3.0 extensible Host Controller Driver with dism into my Boot.Wim I integrate the Controller Driver iusb3xhci.inf and the Hub Driver iusb3Hub.inf into Boot.wim index1 and index 2. Then i copy the files to my USB 2.0 Stick and tried to install on USB 3.0 Port. (If i installed on USB 2.0 all is ok but that isn´t a surprise - no need for USB 3 Drivers ^^) The Board supports USB 3.0 boot. Thats all ok but than the Setup starts and i become the Message that Win 7 needs Driver for CD/DVD It seems that Setup installs the iusb3xhci (the contoller driver ) but not the iusb3hub (Hub driver) because i can search for it on my Drive C:\ (have separate partition for testing) and if i take the Hub Driver than the installation goes on. I think i have a special constellation on my Laptop: My opinion is the Board have only an USB 3.0 Chip that controlls the USB 3.0 Ports and the USB 2.0 Ports, or can anyone explain what is going on here ? :g: So what can i do, to force the setup take the 2 Drivers and not only the Contoller Driver (Because it seems that the HUB Driver isnt in the RAM because the system "see" the Hub only if the controller is installed. I need a methode to force the setup to take both files into RAM to install both drivers. :albert: Or did i have an other Problem that i cant "see" ? P.S sorry for my bad english and if anyone find Misspelling can keep them ^^

Hm and theres my first problem. Did you mean i copy the drivers into System32/Drivers after i mount the install.wim or should i extract the original ISO and then i make in the root a folder called "Drivers" ? and what files should be in there ? i asked because some drivers need only inf and sys but some drivers also needs one ore more dll files ? hm i think im too stupid to do this :noexpression: Also i open the Win Toolkit than i select the folder of the original ISO than i select the install.wim. Then the programm mount the iso and than.... ?

:help: Hello to all. First sorry for my english im a german I start with the theme of integration files into a Win DVD four weeks ago. I read hundreds of post in a lot of forums, especialy here. I try to find out the right programm (now i think Win Toolkit is the best) and the right programm to download updates. But this was a battle for me, because i downloaded hundreds of Gig´s drivers and updates. Some programms needs .cab others needs .msu. Some programms load .msu and .cab others only cab or msu. And than there are a lot of Updates in .exe format wich some can be exctracted and some not. Drivers the same "****". Some drivers are in .exe (some can be extracted some can´t be extractet) some drivers have .inf and .sys others need .dll . Than i try to intgerate drivers with the result of many errors. After 4 Weeks and a lot of experementing i have done but the result isn´t the result i would have. Yesterday i try to integrate updates. Broke with an error. I´m realy frustrated now. Isnt there a step by step guide for integrating drivers and updates ? I mean there are a lot of Guides with only a little part of problems but not a step by step. :crying_anim02: My intention: I want an USB Stick with all Win7/8/server 2003/2008/2012 on it in both versions 64/32 Bit with the most updates that can be (I´m in an 2 year retraining curse so i have all the server versions for free) But im already fail with win7/64 For Win7 (64 and 32) There should be all updates that can be integrate. Net framework 4.5.1 Drivers much as possible (It is not only for my PC ) Flashplayer newest version Java newest version All Microsoft Visual C + + Redistributable IE 9 should be integrated with all updates and the other versions should be in a directory so the user can choose what version he want to install (IE10/11) (i read about an reg-tweak to prevent windows update install the IE 11 but manual installation still works) Summary: Drivers: 1.1.1 If i integrate drivers (Chipset, Storage, USB) in to the boot.wim, what should i choose? Setup or PE or both select 1.1.2 Why i must drivers that i take to boot.wim also integrate in install.wim ? And what options should i take ? And what this means (integrate "HDC" Drivers (boot.wim)/integrate "SCSIADAAPTER Drivers (boot.wim) .....) 1.1.3 After Driver integration into install.wim (LAN/WLAN/Sound/Misc/Bluetooth/Cardreader) and than testing i have in the Hardwaremanager a yellow ? at "basissystem" and "sound". With original installtion i only have a yellow ? at basissystem. How this could be ? I integrate more drivers and have than more yellow ? as the original installation without integrating drivers ? 1.1.4 Why drivers after integration called oem0.inf, oem1.inf, .... and not the original name ? ( I mountet the install.wim and loooked in the INF directory) 1.1.5 What means the option "prepare drivers" ? 1.1.6 After integrating drivers the installtion of Windows takes over 1 hour original 30 minutes. Why ? 1.1.7 Wich is now the right way to integrate drivers ? because i read a post from legolash2o http://www.wincert.net/forum/topic/11996-driver-integration-makes-installation-fail/ (the last 2 posts) Updates: 2.1.1 Wich update porgramms give the most updates that can be integrate ? 2.1.2 Wich form of update i should take msu or cab ? or can i misc ? have updateprogramms that downloaded a few .msu files and a lot of .cab files. 2.1.3 Need the updates a certain sequence to be integrate ? And how i make this at Win Toolkit ? 2.1.4 If the updates needs a certain sequence where i can find a List ? (special to me because i want to integrate IE 9 and not IE11 (in found something but this list take errors in List 1) http://translate.google.de/translate?hl=de&sl=ru&tl=en&u=http://forum.ru-board.com/topic.cgi%3Fforum%3D62%26topic%3D24100%26start%3D6%26limit%3D1%26m%3D1&sandbox=0&usg=ALkJrhj_3QHommzoVchAJK6nFpOQIARDKw 2.1.5 What shoul i do with all the exe files ? (Net framework 4.5.1 and security updates, Microsoft Visual C + + Redistributable, and many others) 2.1.6 What KB and installation files i need for IE 9 integration ? And how than integrate and where i get ? 2.1.7 If i changed my mind and want to integrate IE 10 what files i need now ? 2.1.8 Should i make "LDR-QFE Mode" enabled in the options ? General: 3.1.1 When i have done integrating something should i make a new iso and test it and after testing successful can i take this iso and make other integration or should i take the original iso and make all the things again ? 3.1.2 Wich is the right sequence to integrate ? First driver or updates and than others ? Questions over questions i know but im sorry this is realy realy frustrating. I read a lot of posts but now i´m lost the overview on this theme. In my head there are only KB numbers, msu, cab, inf, sys files im think i´m going crazy :tired: I hope anyone can help me. P.S If anyone have an answer it would be nice when he can answer like 1.1.1 or 3.1.1 and so on, so i can find the right answer to my questions ^^