Jump to content
Sign in to follow this  
HHawk

Thanks and quick question.

Recommended Posts

First; let me express my gratitude for this great application (Win Toolkit)!
I have "always" used RT Se7en Lite / RT7 Lite in the past, but I always had problems with it. Win Toolkit looks and works so much better (as far as I have tested it so far).
 

Secondly; I do have a quick question and though I did use the forum's search function though I couldn't find an answer on my question.

I have created an image with all updates and necessary applications (which I needed), removed several things and tweaked it a bit more. Since I don't use (or have) a DVD drive anymore, I will need to use the "USB Boot Preparation"-function from the "Intermediate" menu, so it will make the USB-stick bootable. And next I will copy the contents over.
 

However I have a question regarding this; I have a UEFI enabled / capable BIOS. Will it automatically setup the USB-stick correctly for UEFI installation or should I first make an .iso (through ISO Maker) with "UEFI" / "BIOS and UEFI" option and copy the contents of the created .iso to the USB-stick?

I am sorry if it sounds stupid, but I just want to make sure that I am doing everything correctly before I start messing around. Normally I would have just tried it, however I am currently at work (building the image during worktime) and I don't have a USB-stick here. So I cannot test it straight away.

Thanks in advance! Highly appreciated.


 

Share this post


Link to post
Share on other sites

 

 

 I first make an .iso (through ISO Maker) with "UEFI" / "BIOS and UEFI" option and copy the contents of the created .iso to the USB-stick

Yep, that is the safe route. :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By niTe_RiDeR_Pr0
      Hello everybody,
      Today I will show you how to install Windows 7 on a PC without a CD/DVD/USB, directly onto the HDD, even without the installation wizard/setup ! [Fastest Method]
      Yesterday my new hard drive for my laptop arrived, and instead of cloning my existing disk, I decided to do a clean install of Windows 10. But I didnt have much time, cuz after installing windows 10, I had to copy my existing downloads, pictures, videos, install programs, etc. & I thought there must be some other way to easily install windows 10 without that installation wizard/setup. After some research, I made my own method, & installed it succesfully, faster than their setup wizard! Now I am gonna show you how to accomplish that. [This guide will work for Windows 8/8.1 also] Lets Begin!   
      Pre-Requisites
      Seperate Hard Drive with atleast 20GB space, with only 2 primary partitions [where you have to install Win8/8.1] [An empty/new hard drive is highly recommended] Working PC/laptop with Windows XP or above installed, with Internet access  Procedure:
      Firstly, download Windows 7 ISO & extract it to C:\win7 using some archive manager like 7zip/winrar, or Copy the Windows 7 CD contents to C:\win7. Now connect that separate hard drive to your PC (If you have extra hdd cage, then connect to it, else buy a SATA to USB hard disk enclosure like this one) Open a command prompt as administrator (Go to start menu > search cmd > Rightclick on the first search result & Run as administrator) Type: diskpart Now type: list disk It will show the disks connected to your PC. According to the size shown, you should be able to know which is your disk.  Type: select disk X  [Replace X with the disk number which you saw in the previous guide, in my case it was disk 1] Type the following one by one:  create partition primary size=350 format fs=ntfs unit=4096 label="System Reserved" quick active assign letter=P create partition primary size="Any size convenient for you, in MB" format fs=ntfs label="Windows 7" quick assign letter=Q exit Your partitions have been configured! Now, if you are in Windows 7 (or below), download DISM from here, open the file, when It will ask for extraction folder, change the location to: C:\dism
      Now in Windows Explorer, browse to c:\win7\sources (sources folder inside the folder where you copied/extracted setup files) & check whether you have install.esd or install.wim. Now you have to know the index number of the edition which want to install. Type the following without quotes: 
      cd c:\dism ## [DO NOT TYPE THIS] Skip the first line if you are running Windows 8/above. dism /get-wiminfo /wimfile:C:\win7\sources\install.wim ## This should output the index numbers of different windows 7 editions. ## Note down the index number of the edition which you require. Now, this is the most important step. All the windows files are gonna get copied to the partition. If you are in Windows 7 or below, Open command prompt as administrator & type the following: 
      cd c:\dism Dism /apply-image /imagefile:C:\win8\sources\install.esd /index:1 /ApplyDir:Q:\ ## [DO NOT TYPE THIS] You can replace /index:1 with the index number which we ## found out earlier. ## Also, if you have an insall.wim instead of install.exe in your \sources folder, ## Then replace install.esd with install.wim (in 2nd command). Now you have successfully extracted all the files for windows! Now, all you have to do is prepare the boot files in the System Reserved partition, so that Windows can be booted from the drive succesfully.
      Now you are gonna prepare the System Reserved partition for booting into Windows 7. Type the following in Administrator CMD Window:
      bcdboot Q:\Windows /l en-us /s P: /f ALL ## [DO NOT TYPE THIS] You can replace en-us with your locale, ## For eg. en-in, en-gb, en-ru etc. Everything is done! You are now ready to go! Now boot into the drive. If you did everything correctly & succesfully, then Windows will boot to the welcome screen. Done! Enjoy the manually installed Windows!   
       
      Hope this guide was helpful & easy to you. If you have doubt about something or you got any errors, or if windows doesnt boot after performing all the steps correctly, then feel free to post below.
       
      Cheers & Regards,
      niT3_RiDeR_Pr0
    • By niTe_RiDeR_Pr0
      Hello everybody,
      Today I will show you how to install Windows 10 on a PC without a CD/DVD/USB, directly onto the HDD, even without the installation wizard/setup ! [Fastest Method]
      Yesterday my new hard drive for my laptop arrived, and instead of cloning my existing disk, I decided to do a clean install of Windows 10. But I didnt have much time, cuz after installing windows 10, I had to copy my existing downloads, pictures, videos, install programs, etc. & I thought there must be some other way to easily install windows 10 without that installation wizard/setup. After some research, I made my own method, & installed it succesfully, faster than their setup wizard! Now I am gonna show you how to accomplish that. Lets Begin!  
      Pre-Requisites
      Seperate Hard Drive with atleast 20GB space, with only 2 primary partitions [where you have to install Win10] [An empty/new hard drive is highly recommended] Working PC/laptop with Windows XP or above installed, with Internet access  Procedure:
      Firstly, download Windows 10 ISO using Windows 10 Download Tool from here & extract it to C:\win10 using some archive manager like 7zip/winrar.  Now connect that seperate hard drive to your PC (If you have externel harddrive cage, then connect to it, else buy a SATA to USB hard disk enclosure like this one) Open a command prompt as administrator (Go to start menu > search cmd > Rightclick on the first search result & RUn as administrator) Type: diskpart Now type: list disk It will show the disks connected to your PC. According to the size, you should be able to know which is your disk.  Type: select disk X  [Replace X with the disk number which you saw in the previous guide, in my case it was disk 1] Type the following one by one:  create partition primary size=350 format fs=ntfs unit=4096 label="System Reserved" quick active assign letter=P create partition primary size="Any size convenient for you, in MB" format fs=ntfs label="Windows 10" quick assign letter=Q exit Your partitions have been configured! Now, if you are in Windows 7 (or below), download DISM from here, open the file, when It will ask for extraction folder, change the location to: C:\dism
      Now, this is the most important step. All the windows files will be copied to the partition.  
      cd c:\dism ## Skip the above line if you are running Windows 8 & above. Dism /apply-image /imagefile:C:\win10\sources\install.esd /index:1 /ApplyDir:Q:\ ## [DO NOT TYPE THIS] If you downloaded Windows 10 normal edition using the Download Tool, ## & if you want to install Win10 Home then replace /index:1 with /index:2. ## For Win10 pro it is /index:1. Windows XP & Windows 8 users may (cuz I havent tested in them, but it works in 8.1 & 10) need to convert the install.esd file into an install.wim file (if some error shows up). Search in Google How to convert esd to wim
      Now you have successfully extracted all the files for windows! Now all you have to do is prepare the boot files in the System Reserved partition.
      Now you are gonna prepare the System Reserved partition for booting succesfully. Run the following in administrator CMD:
      bcdboot Q:\Windows /l en-us /s P: /f ALL ## [DO NOT TYPE THIS] You can replace en-us with your locale, ## For eg. en-in, en-gb, en-ru etc. Everything is done! Now you are ready to go! Now boot into the drive. If you did everything correctly & succesfully, then Windows will boot to the welcome screen. Done! Enjoy the manually installed Windows!   
       
      Hope this guide was helpful & easy to you. If you have doubt about something or you got any errors, or if windows doesnt boot, then feel free to post below.
       
      Cheers & Regards,
      niT3_RiDeR_Pr0
       
    • By niTe_RiDeR_Pr0
      Hello everybody,
      Today I will show you how to install Windows 8/8.1 on a PC without a CD/DVD/USB, directly onto the HDD, even without the installation wizard/setup ! [Fastest Method]
      Yesterday my new hard drive for my laptop arrived, and instead of cloning my existing disk, I decided to do a clean install of Windows 10. But I didnt have much time, cuz after installing windows 10, I had to copy my existing downloads, pictures, videos, install programs, etc. & I thought there must be some other way to easily install windows 10 without that installation wizard/setup. After some research, I made my own method, & installed it succesfully, faster than their setup wizard! Now I am gonna show you how to accomplish that. [This guide will work for Windows 8/8.1 also] Lets Begin!   
      Pre-Requisites
      Seperate Hard Drive with atleast 20GB space, with only 2 primary partitions [where you have to install Win8/8.1] [An empty/new hard drive is highly recommended] Working PC/laptop with Windows XP or above installed, with Internet access  Procedure:
      Firstly, download Windows 8/8.1 ISO & extract it to C:\win8 using some archive manager like 7zip/winrar, or COpy the Windows 8/8.1 CD contents to C:\win8. Now connect that separate hard drive to your PC (If you have externel harddrive cage, then connect to it, else buy a SATA to USB hard disk enclosure like this one) Open a command prompt as administrator (Go to start menu > search cmd > Rightclick on the first search result & RUn as administrator) Type: diskpart Now type: list disk It will show the disks connected to your PC. According to the size shown, you should be able to know which is your disk.  Type: select disk X  [Replace X with the disk number which you saw in the previous guide, in my case it was disk 1] Type the following one by one:  create partition primary size=350 format fs=ntfs unit=4096 label="System Reserved" quick active assign letter=P create partition primary size="Any size convenient for you, in MB" format fs=ntfs label="Windows 8" quick assign letter=Q exit Your partitions have been configured! Now, if you are in Windows 7 (or below), download DISM from here, open the file, when It will ask for extraction folder, change the location to: C:\dism
      Now in Windows Explorer, browse to c:\win8\sources (sources folder inside the folder where you copied/extracted setup files) & check whether you have install.esd or install.wim. Now you have to know the index number in the wim/esd file, of the Win8/8.1 edition which you want to install. Type the following commands in an administrator CMD: 
      cd c:\dism ## [DO NOT TYPE THIS] Skip the first line if you are running Windows 8/above. dism /get-wiminfo /wimfile:C:\win8\sources\install.esd ## This should output the index numbers of different windows 8/8.1 editios. ## Note down the index number of your chosen edition. ## Also, if you have an insall.wim instead of install.esd in your \sources folder, ## Then replace install.esd with install.wim (in 2nd command). Now, this is the most important step. All the windows files will be copied to the partition. 
      cd c:\dism Dism /apply-image /imagefile:C:\win8\sources\install.esd /index:1 /ApplyDir:Q:\ ## [DO NOT TYPE THIS] You can replace /index:1 with the index number which we ## found out earlier. ## Also, if you have an insall.wim instead of install.exe in your \sources folder, ## Then replace install.esd with install.wim (in 2nd command). If you have an install.esd file instead of wim file, Windows XP & Windows 8 users may (cuz I havent tested in them, but it works in 8.1 & 10) need to convert the install.esd file into an install.wim file (if some error shows up). Search in Google How to convert esd to wim Now you have successfully extracted all the files for windows! Now all you have to do is prepare the boot files in the System Reserved partition.
      Now you are gonna prepare the System Reserved partition for booting into Win8/8.1 succesfully. Type the following in administrator CMD:
      bcdboot Q:\Windows /l en-us /s P: /f ALL ## [DO NOT TYPE THIS] You can replace en-us with your locale, ## For eg. en-in, en-gb, en-ru etc. Everything is done! You are now ready to go! Now boot into the drive. If you did everything correctly & succesfully, then Windows will boot to the welcome screen. Done! Enjoy the manually installed Windows!   
       
      Hope this guide was helpful & easy to you. If you have doubt about something or you got any errors, or if windows doesnt boot after performing all the steps correctly, then feel free to post below.
       
      Cheers & Regards,
      niT3_RiDeR_Pr0
    • By Tuesday77
      Heyho,

      Here I repacked all USB 3.0 Driver for Windows 7 and newer.
      Integrate them into boot.wim and you can install windows via usb 3.0.

      Download:
      http://ul.to/ikwo4fq9

      Virustotal.com Report
      CRC32: F0D2A8A7
      MD5: 4EAE3DB9E9ECF20FF5384BA13813354A
      SHA-1: 762056614722BDE9915BDA7CD097BF370D0F9509
      17,3 MB (18.223.857 bytes)

      Greetings
    • By Tuesday77
      Heyho,

      Here I repacked all USB 3.0 Driver for Windows 7 and newer.
      Integrate them into boot.wim and you can install windows via usb 3.0.

      Download:
      http://ul.to/ikwo4fq9

      Virustotal.com Report
      CRC32: F0D2A8A7
      MD5: 4EAE3DB9E9ECF20FF5384BA13813354A
      SHA-1: 762056614722BDE9915BDA7CD097BF370D0F9509
      17,3 MB (18.223.857 bytes)

      Greetings
×
×
  • Create New...