Jump to content

Can't install unattended


XC*LUSiVE
 Share

Recommended Posts

Hi,

I'm having a problem with Autounattend.xml. When I apply with W7T (quick or full, doesn't matter). I got "Device driver not found" error at setup and it asks me to find drivers. I also integrated "MassStorage DP_x86", so I can't still find the problem. Without Autounattend.xml, I don't have any problems at install.

How can I solve this problem?

Thanks

Link to comment
Share on other sites

OK, there is quite a difference between your Autounattend.xml and one generated from "Unattended Creator" in v.1.3.0.98.

First of all, please delete your key from the Autounattend.xml !

Try this Autounattend.xml, import it within "Unattended Creator" in v.1.3.0.98 and place your key in it.

Then save the file and test it again.

Autounattend.xml

Edited by caphp
Link to comment
Share on other sites

@XC*LUSiVE

I'm guessing you have used 7Customizer to create your Autounattend.xml file.

You can change inside Autounattend.xml file:


<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SystemLocale>tr-TR</SystemLocale>
<UserLocale>tr-TR</UserLocale>
<UILanguage>tr-TR</UILanguage>
<InputLocale>041f:0000041f</InputLocale>
</component>

And also:


<settings pass="specialize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<AutoLogon>
<Enabled>true</Enabled>
<Username>XCLUSiVE7</Username>
<Password>
<PlainText>true</PlainText>
<Value></Value>
</Password>
<LogonCount>9999999</LogonCount>
</AutoLogon>
<TimeZone>GTB Standard Time</TimeZone>
<ComputerName>EXC7-PC</ComputerName>
</component>

And if you change the "Folder_Location" you need to change the path for the last line or remove this one:


<cpi:offlineImage cpi:source="wim:E:/7Work/DVD/sources/install.wim#Windows 7 Ultimate" xmlns:cpi="urn:schemas-microsoft-com:cpi" />

And you can check your Autounattend.xml file with WSIM and valdate it. You need first to install WAIK 3.0 for Windows 7, and WSIM is include inside.

http://www.microsoft.com/downloads/tr-tr/details.aspx?FamilyID=696dd665-9f76-4177-a811-39c26d3b3b34

I hope that can help you!

Edited by myselfidem
Link to comment
Share on other sites

OK, there is quite a difference between your Autounattend.xml and one generated from "Unattended Creator" in v.1.3.0.98.

First of all, please delete your key from the Autounattend.xml !

Try this Autounattend.xml, import it within "Unattended Creator" in v.1.3.0.98 and place your key in it.

The save the file and test it again.

same problem :(

@XC*LUSiVE

I'm guessing you have used 7Customizer to create your Autounattend.xml file.

You can change inside Autounattend.xml file:


<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SystemLocale>tr-TR</SystemLocale>
<UserLocale>tr-TR</UserLocale>
<UILanguage>tr-TR</UILanguage>
<InputLocale>041f:0000041f</InputLocale>
</component>

And also:


<settings pass="specialize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<AutoLogon>
<Enabled>true</Enabled>
<Username>XCLUSiVE7</Username>
<Password>
<PlainText>true</PlainText>
<Value></Value>
</Password>
<LogonCount>9999999</LogonCount>
</AutoLogon>
<TimeZone>GTB Standard Time</TimeZone>
<ComputerName>EXC7-PC</ComputerName>
</component>

And if you change the "Folder_Location" you need to change the path for the last line or remove this one:


<cpi:offlineImage cpi:source="wim:E:/7Work/DVD/sources/install.wim#Windows 7 Ultimate" xmlns:cpi="urn:schemas-microsoft-com:cpi" />

And you can check your Autounattend.xml file with WSIM and valdate it. You need first to install WAIK 3.0 for Windows 7, and WSIM is include inside.

http://www.microsoft...11-39c26d3b3b34

I hope that can help you!

Yeah, You're right. I used 7customizer. It has been working on my old work (win7 sp0).

My current work is for captured wim. Are there any problems for captured wim files?

Link to comment
Share on other sites

My current work is for captured wim. Are there any problems for captured wim files?

No!

I think the problem is with the last line inside your Autounattend.xml file.

Try to remove the last line and save your file (or change the path for install.wim)!

You can check also the <Value /> (error) for password on my post above.

Thanks to let us know the result.

Link to comment
Share on other sites

No!

I think the problem is with the last line inside your Autounattend.xml file.

Try to remove the last line and save your file (or change the path for install.wim)!

You can check also the <Value /> (error) for password on my post above.

Thanks to let us know the result.


<?xml version="1.0" encoding="utf-8"?>
<!--Created by Windows 7 Toolkit v1.3.0.98-->
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SystemLocale>tr-TR</SystemLocale>
<UserLocale>tr-TR</UserLocale>
<UILanguage>tr-TR</UILanguage>
<InputLocale>041f:0000041f</InputLocale>
</component>
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
</settings>
</unattend>

This is the simpliest one, but it still doesn't work! I'm going to be crazy!

Link to comment
Share on other sites

How do you have integrated SP1? Using sysprep ?

Try to create your ISO file with your Autounattend.xml file at the root of your distribution folder , without using W7T and let us know.

Thanks

I downloaded the ISO from MSDN, so it has already had SP1. I used sysprep for other things. I tried without W7T. Same problem :(

Edited by XC*LUSiVE
Link to comment
Share on other sites

OK!

I haven't this problem with my install.wim SP1 customized and captured using sysprep, and with my clean MSDN SP1!

Maybe you can try to use your clean MSDN Windows 7 SP1 with your Autounattend.xml file only!

And how do you create your iso file with a batch file ?

Thanks to let us know!

Edited by myselfidem
Link to comment
Share on other sites

OK!

I haven't this problem with my install.wim SP1 customized and captured using sysprep, and with my clean MSDN SP1!

Maybe you can try to use your clean MSDN Windows 7 SP1 with your Autounattend.xml file only!

And how do you create your iso file with a batch file ?

Thanks to let us know!

I create my ISO file by W7T.

I started to rebulid my work. I'll keep the old one...

Edited by XC*LUSiVE
Link to comment
Share on other sites

However,

I have already encountered this problem, and I think when the iso is created some programs are working on background ,like Antivirus and an error occurs during the silent installation!

I'm using Windows Developer Preview. It has Windows Defender (bulit-in MSE). I haven't installed other security softwares. WD doesn't snoop.

Link to comment
Share on other sites

There is something wrong inside your customized image !

You have used 7Customizer and after W7T.

Try to use, like I said, an original Windows 7 SP1 with your Autounattend.xml file!

I used 7customizer for only autounattend.xml. I used it before, and I hadn't had any problem.

Link to comment
Share on other sites

Do the same with your SP1!

And you can use W7T with a clean Windows 7 SP1. It's better do not use two programs to customize your image!

I want it too, but the xml file which is generated by W7T doesn't skip the language choice, wellcome part and select image part at setup. Therefore, I used 7customizer. Generating autounattend.xml isn't a customization for wim image.

Link to comment
Share on other sites

I downloaded the ISO from MSDN, so it has already had SP1. I used sysprep for other things. I tried without W7T. Same problem :(

I think you made something wrong using sysprep !

Maybe the compression isn't the same when you have captured the image , or other...?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...