blackace
-
Posts
40 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by blackace
-
-
hello everyone, i've encountered this problem first, when I defrag my pc, second, after i used windows updates.. After i've restart the computer, there's no animated bootscreen that appeared and it stays as a blank screen(black screen maybe).. there's no option like safe mode, restore to last known good configuration etc... after my bios checked for my devices, there it goes.. a Blank screen.. I tried using startup repair but it doesn't fix, even bootsec /fixmbr and /fixboot doesn't fix it? is it a virus? or a corrupt files?
-
Yes, it will overheat, you must use a thermal paste. If there is no thermal paste the heatsink will not pull all of the heat from the CPU.
:thumbsup_anim: well, all your tips really helps.. I'm going to start buying
a new motherboard and thermal cooling paste, that's what I need for now.. When I'm holding the new Motherboard and my Old CPU, I must put my other hand to the metal case in order to discharge the static electricity, right? :icon_cool:
-
The only time you will get thermal paste is when you buy a new CPU or heatsink. You will have to purchase that separate. Everything is pretty much just plug and play. A couple things to look out for is watch how you but your RAM and CPU in, they do only go in one way. On the CPU look for a little arrow in the corner of the CPU, there will also be a little arrow on the CPU socket. With the RAM, just make sure that the notch on the RAM lines up with the notch in the slot before you push down. There are several videos online.
thank you for this videos it helps a lot.. what about my cpu? will i encounter overheating because I didn't apply thermal cooling paste? It's Pentium D...
-
Yeah, I kind of leave my forearm on the case. I had to use the straps when I was in school and I personally think they get in the way. In school I did a tear down and build in 16 minutes. LOL. For 3 months (Hardware Semester) we had to tear down and build our system every morning. It got so boring.
thanks for the replies guys. well this will be my first time to install a motherboard on my own because I'm only looking forward to the pci-e feature of the motherboards and its similarity specs with my old "mobo".. What will be the bad effects of transferring the parts of my old MOBO to the new MOBO like the processor, cpu fan, hard disk, ram, cd drives, modems etc.. what problems will i perhaps encounter? I also want to ask to some of you who already bought mobo on their own, Does new MOBO includes thermal cooling paste? if not, where is it included? is it necessary to apply new thermal cooling to the new MOBO? or i just install it as normal? :thumbsup_anim: :welcome: :sweatingbullets:
-
Hi everyone. I'm planning to buy a new motherboard because my pc's motherboard doesn't have a pci-e slot and there's no agp8x videocard available in our market right now. I've read on some websites that electro static wrist strap is important when constructing a new pc. I will only buy a motherboard which is LGA 775 socket because my old motherboard is also using that socket. Is it a good idea that i will wrap my fingers with electrical tape as an alternate method using the electro static wrist strap because there is no electro static wrist strap available in our market.... another thing is that, can i use the old devices in my motherboard? such as DDR2 RAM, HDD, COMBO CD WRITER, PCI MODEM.. The motherboard that i will buy is just similar to my old but it has pci-e and it is new but it is still DDR2, ATX, and LGA 775 Socket.... Can i still use my old cpu? it's expensive to buy a new cpu.. Sir N1K and to all Members, I need your help..THANK YOU VERY MUCH :welcome: :thumbsup_anim: :sweatingbullets:
btw, here's the spec for my old motherboard:
CPU
LGA775 socket for latest Intel Core 2 Duo / Pentium D / Pentium 4 / Celeron D processor
FSB 1066/800/533 MHz
Support Hyper-Threading Technology
CHIPSET
VIA® P4M800Pro & VT8237R+
North Bridge: VIA® P4M800Pro
South Bridge: VIA® VT8237R+
GRAPHICS
Integrated S3 UniChrome 2D/3D Graphics
MEMORY
2 x 240-pin DDR2 DIMM socket support up to 2 GB
Support DDR2 533 DDR2 SDRAM
EXPANSION SLOT
1 x AGP 8X slot
3 x PCI slots
1 x CNR slot
STORAGE
Supported by VIA VT8237R+
4 x Ultra DMA133/100/66 devices
2 x Serial ATA devices
RAID0 & RAID1 configuration
AUDIO
Realtek ALC655 6-Channel audio CODEC
Compliant with AC'97 2.3 specification
LAN
VIA® VT6103L 10/100 Mbps Fast Ethernet PHY
REAR PANEL I/O
1 x PS/2 keyboard & PS/2 mouse connectors
1 x Parallel port (LPT)
1 x Serial port (COM1)
1 x VGA port
4 x USB ports
1 x RJ45 LAN connector
1 x Audio port (Line-in, Line-out, Mic-in)
INTERNAL I/O CONNECTORS & HEADERS
1 x 24-pin ATX Power Supply connector
1 x 4-pin ATX 12V connector
1 x FDD connector
2 x IDE connectors
2 x Serial ATA connectors
2 x USB 2.0 headers support additional 4 USB Ports
1 x Buzzer
1 x IrDA for SIR header
1 x Front panel switch/LED header
1 x Front panel audio header
AUX-in header
1 x CD in header
CPUFAN/SYSFAN connectors
SYSTEM BIOS
AMI BIOS with 4Mb Flash ROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Supports ACPI revision 1.0 specification
FORM FACTOR
Micro-ATX Size, 244mm*220mm
the spec of the motherboard that i will buy:
CPU
LGA775 socket for Intel Pentium 4/ Celeron D/ Pentium D processor
FSB 1066/800/533 MHz
Support Hyper-Threading Technology
CHIPSET
Intel® 945P & ICH7R
North Bridge: Intel® 945P
South Bridge: Intel® ICH7R
MEMORY
Dual-channel DDR2 memory architecture
4 x 240-pin DDR2 DIMM socket support up to 4 GB
Support DDR2 667/533/400 DDR2 SDRAM
EXPANSION SLOT
2 x PCI Express x16 slots
2 x PCI Express x16 slot (Orange : x16 mode, Blue : x4 mode)
1 x PCI Express x1 slot *
2 x PCI Express x1 slot (x1 or *diabled mode)
3 x PCI slots
*when use two PCI Express VGA card, this slot is disable
STORAGE
Supported by Intel®ICH7R
2 x Ultra DMA100/66 devices
4 x Serial ATAII 3.0Gb/s devices
RAID0, RAID1, RAID0+1, RAID5 configuration
Supported by SiI3132
2 x Serial ATAII 3.0Gb/s devices
RAID0, RAID1& e-SATA configuration
AUDIO
Realtek ALC880 8-channel audio CODEC
IEEE 1394a
VIA® VT6307, support 2x IEEE1394a ports
DUAL LAN
Marvell 88E8053 PCI-E Gigabit LAN controller
Realtek RTL8100C 10/100 LAN controller
REAR PANEL I/O
1 x PS/2 keyboard & PS/2 mouse connectors
4 x USB ports
2 x RJ45 LAN connectors
1 x 1394a connector (4-pin)
1 x SPDIF in connector
1 x Serial port (COM1)
1 x FAN Duct
1 x Audio port (Line-in,4x Line-out, SPDIF out)
INTERNAL I/O CONNECTORS & HEADERS
1 x 24-pin ATX Power Supply connector
1 x 4-pin ATX 12V connector
1 x FDD connector supports two 360K~2.88MB FDDs
1 x IrDA for SIR header
1 x Speaker header
1 x 1394a header
2 x USB 2.0 headers support additional 4 USB Ports
6 x Serial ATA 3Gb/s connectors
1 x Front panel switch/LED header
1 x Front panel audio header
1 x CD in header
CPUFAN/NB_FAN/3x SYSFAN connectors
SYSTEM BIOS
AMI BIOS with 4Mb Flash ROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Supports ACPI revision 1.0 specification
FORM FACTOR
ATX Size, 305mm*244mm
-
i just want to ask if , do you know some programs that would force all my programs to use a proxy localhost or 127.0.0.1 port 8080 as a proxy to connect to the internet? i use jap/jondo as my ip hider and it uses port 8080 and localhost to be enable all the programs like firefox and internet explorer that has a manual proxy configuration to use jap/jondo.. thanks in advance....
-
Well, honestly, it is for your own good to do it yourself.
yeah, thanks! Sorry again to all of you! :sweatingbullets: :icon_cool:
-
sorry men, I do not force you all to do my homework I'm just asking if someone is interested to do it for me. But, I'm sorry because I don't know the rules. Hope you forgive me all. :thumbsdown_anim: :crying_anim02: :crying_anim02:
-
Guys, I had a project again. My teacher want me to have a project about microsoft word. I will create data's about microsoft word and make it via powerpoint. Can you make it for me??? Peace if none, It's alright.
-
the hell!? that computer is an old age PC. Wahahaha! :worthy:
-
LMAO.
moonwalk has been the best dance moves of MJ. :icon_cool:
-
LOL. I had tihs same thing when I was going to school at N.I.T. now known as Everest Institute. It took all of 15 sec's on google with copy and paste.
hahaha! awesome! Being a student is always :thumbsup_anim: :icon_cool: :icon_cool: accompanied by hardwork!
-
Added Windows 2000 and put a vote for you in it m8!
I haven't use Windows 2000, what's the feature that make it the best men? could you tell me? :thumbsup_anim: :icon_cool:
-
windows 2000 will always be my favorite. its not on the list though
as for "best" probably win7 since thats the most current and will have worked out a lot of things that was displeasing with vista
yeah that's true. Win 7 is the best compared to vista. Maybe 7, is just a fix for vista :icon_cool:
-
Till now i am using XP sp3. I once installed Vista but due to incompability and it's useless feature i again have to downgrade to XP.
I don't say vista is crap it's instant search and startmenu search was very good and wish microsoft to integrate this on XP in future SP. NOw i am using 3rd party software to get these stuffs
using transformation pack could help.
-
+1 N1K yes the best one, my choice too for years, it's a veeeery great tool and working on both Xp and Vista as well. Yeah it's actually a shareware but i think that the price is still reasonable for its awesome features imho, btw i and 9 other members just got the 2009 license legally for free (up to 3 personal computers for one license!) from a kind promo in Wincert here about 3 months ago, once again thank you so much N1K for that yeah :thumbsup_anim:
Wincert and JV 16 FTW!
Oh, thank you very much. I'm going to try that one. :icon_cool:
-
Yeah, It's possible all you to do this follow the Steps below.
Customizing the keyboard :-
To get to the Customize Keyboard dialog box in Word, on the Tools menu, click Customize, and then click the Keyboard button at the bottom of the dialog box.
To make your own keyboard shortcuts, all you need to know is:
* The name of the command you want to make a shortcut for. A command is a choice on a menu. For example, on the Format menu, some commands are Font, Paragraph, and Bullets and Numbering.
* A key combination that you can remember, and that isn't already being used in Word. (Some key combinations are already assigned as shortcuts
-
LMAO I thought this was going to be another stupid mj is dead topic, but the first post made me laugh
Oh boy, what's all about him? Let him rest, don't bother MJ. :sleeping:
-
guys, do you know the trick in MS Word 2003 or 2007 that could change the shortcut keys in it? for example, the shortcut key for cut and paste is ctrl+x and ctrl+v. Now, I want to change the shortcut key for cut and paste on my own. Is it possible or not? :sweatingbullets: :sweatingbullets:
:help: :help:
-
Even if you use Windows 7 XP will still be relevant, my spanish XP rocks in Windows Virtual PC...its better than the XP that comes with XP Mode
Yeah, that's the main feature of Windows 7. But I'm still waiting for the release of Windows 7 here in the Philippines, If Windows 7 will be available here within this year, I'm going to use Windows 7 in Virtual PC with XP. :icon_cool:
-
thank you very much! :thumbsup_anim: now, I could pass my project early. Thanks Brother!
:thumbsup_anim:
Off-Topic Comment(Click to Show)please don't delete this topic. I'm still going to visit this topic. Thanks.[Close]
-
I need only a shortcut using ctrl key. Thanks for the help Gupta :thumbsup_anim: :icon_cool:
-
Oh, sad to say. I'm still a student and we've been assigned to give 100 keyboard shortcuts using ctrl(control) special key. Can you offer me this? Thanks.... :crying_anim02:
-
Even though XP's GUI is a little bit old than Windows 7 and Vista, Still it offers all the needs of computer users, It has improved stability and performance when Service Pack 3 was released. Onepiece offers post update pack and it really helps XP to be more reliable and improved it's overall Performance.
Also, XP can be run on a less powerful PC than Vista. It only requires a minimum PC specs and that is why XP is mostly used by People.
Windows 7 in the case, Microsoft had really improved it rather than Vista. All the problems, bugs, instability, compatibility problems in Windows Vista has been fixed in Windows 7.
So I say, that Win 7 and XPSp3 is the best OS available from Microsoft right now.. :thumbsup_anim: :icon_cool:
Windows 7 can't boot.. hangs on blank screen
in Microsoft Windows 7
Posted
thanks for the reply, but I already tried this method and it doesn't fix the problem. maybe reformatting is the solution. I'll use Vista again and if Microsoft released a Service Pack for Windows 7 I'll use 7 as my OS again. Thank You So Much for your reply.