[[Solved] Bug in v1.4.1.15 (IE)?]

I'm confused... what new release?

I don't know if it's a "bug or feature" in the new release:

 

IE9, KB2792100 and KB2797052 goes red and I have only IE8 in my installation; with Test_15 no issue and IE9 installs.

 

Regards, Thiersee

 

P.S.: I don't want to install IE10, because there is no access to Microsoft-Update for "Other Software" anymore, see the result:

 

[Installation failed]

IMHO that's exactly why I suggest people do this in steps...how do you know where the problem is? Is it with the hotfixes? Is it with the removals? Is it with the tweaks? If you had created an image with the hotfixes and that worked then you could keep that WIM and just play with that adding tweaks, removals etc until it works... much easier that having to run the entire process over from scratch.

[WARNING: 1.4.1.15_Test5 [Experimental]]

Great news  :dribble:

Expect a new release today

[Howto boot a Wintoolkit Image over PXE]

I am extremely interested and was going to request this... thanks

Hi,

 

is someone or maybe two interested in a howto that describes howto boot a prepared image

created with wintoolkit over pxe to install it?

 

I have a working procedure and if you guys are interested i would write it down because it may help others.

 

 

Greetz X23

[[Slim] .NET Framework 4.6.1 Full x86/x64 (2-27-2016)]

I wondered... that's awesome thanks

Yes, by default the .net4.5 installer will do that (thats why I removed /ain)

[[Slim] .NET Framework 4.6.1 Full x86/x64 (2-27-2016)]

Rick, does this installer auto run Ngen tasks?

[Sandisk Extreme 3.0 32GB can't go on at install destination?]

I had also seen that a few times when I was starting my USB installs on some Dell laptops BUT mine was USB 2 drives with USB 3 ports... I haven't seen that problem in ages though so I can't provide any useful info 

Thtats great, I had a feeling that post #23 would work.  I have seen this unusual annoying behavior, not only with San Disk but other brands as well. 

[[Question] WinToolkitRunOnce.exe and Setupcomplete.cmd]

I just tested it and etz is 100% accurate... I used some time stamping to determine what runs first and sure enough... now I have to figure what if any impact this has on my process

 

Here is some basic info about the timing:

 

1049 setup is starting copying windows files

1058 1st reboot starting windows, updating registry

1059 starting services, flashes, completing 1st part gui install

1104 setup will continue after restart

1104 2nd reboot starting windows

1105 preparing 1st use, video check,

1105 SETUPCOMPLETE.CMD 

1106 welcome, preparing desktop

1108 sfx #4 of 48

1132 kommclean

1133 personalize settings screen Done

I am running a test now

[[Question] WinToolkitRunOnce.exe and Setupcomplete.cmd]

I am running a test now

@Compstuff

 

Can you confirm that installers run first and then setup complete. I just saw a post by etz that claims the oposite. Setupcomplete.cmd first then the installers. 

 

Post by etz

[[SOLVED] Integrate USB Driver to (boot.wim) how?]

That's a nice find :-)

@compstuff,

You and I use the same tools for removing ADS (Zone.Indentifier) streams. I've been considering using this more global approach. it's a layer of security i can live without. .
 

[[SOLVED] Integrate USB Driver to (boot.wim) how?]

I use this tool on all my integration's files before I do them:

 

http://www.nirsoft.net/utils/alternate_data_streams.html

[Sandisk Extreme 3.0 32GB can't go on at install destination?]

I definitely don't know why you are having this odd problem but here are some further comments:

 

I have never been able to get the MS WIN7 USB tool to work with anything over a 4 gig stick

I never used the WinToolKit USB tool so I have no experience with it, I have been using Rufus http://rufus.akeo.ie/

I have never used a USB 3 stick but I can't see why it would be a problem since you are on a USB 2 system

 

Maybe try Rufus and see if it changes the problem in anyway or maybe reformat the USB and start fresh again

[[Repak] Microsoft Security Essentials x86/x64 4.5.216 (Intl)]

I never knew about the GUI so you turned me on to that one... thanks :-)

Thanks, I thought so but thought I'd make sure.  I wonder if it would also be compatible with wGetGUI v1.20? I'll have to try it and see one of these days.

Cheers and Regards

[[Repak] Microsoft Security Essentials x86/x64 4.5.216 (Intl)]

I will PM you  :dizzy:

 

If you think you can do it you could rebuild the sfx with the capabilities...just add this to the config.txt

AutoInstall="x86:\"%%S\\nis_full\" /q"AutoInstall="x64:\"%%S\\nis_full%%P\" /q"

Let me know if you need help

[[Repak] Microsoft Security Essentials x86/x64 4.5.216 (Intl)]

Since I am not on XP I could be wrong... but I think they do actually get installed its just that XP doesn't have the capable service to make use of them and it never will

 

You don't need the network inspection system definitions. Those won't get installed on a Win 7 system. Trust me...

 

 

I think I will leave that one out for the time being, because its not compatible with XP and the x64 in the filename.

[[Repak] Microsoft Security Essentials x86/x64 4.5.216 (Intl)]

This explains it better than I can :-)

http://www.windowsecurity.com/articles-tutorials/intrusion_detection/Network-Inspection-System-Enhances-Security-Microsoft-Security-Essentials-TMG-Firewall.html

Sorry for asking, but:

 

What is the purpose of nis.exe?

How can I see the build of MSE?

 

From compstuff's link:

 

This is my installed MSE

 

 

Regards, Thiersee

[[Repak] Microsoft Security Essentials x86/x64 4.5.216 (Intl)]

http://www.alexlomas.com/blog/2005/08/64_bit_wget_for_windows/

@compstuff,

 

OT - Where did you get wGet64? What version is it? When I have used wGet, I have used Wget v1.11.4, along with wGetGUI v1.20, both of which were the latest versions I was aware of.

 

Cheers and Regards

[Sandisk Extreme 3.0 32GB can't go on at install destination?]

How exactly are you making the USB with the ISO

[[Repak] Microsoft Security Essentials x86/x64 4.5.216 (Intl)]

I have never been able to find one with the x64 designation and I used to just rename mine with my script

Do you know of a fwlink from Microsoft that will download a file with x64 in the name (nis_fullx64.exe) same as the definitions?

I need this difference between the two filenames so that the installer will call the right one depending on what arch it detects you are launching from
 

[Large Image Size]

I have a whole bunch of stuff I add to my image and I include an automated install of Office 2010 with it so I'm running about 10 gig right now and I use a 16 gig USB

[[Repak] Microsoft Security Essentials x86/x64 4.5.216 (Intl)]

There is an x86 and x64 version:

 

http://www.microsoft.com/security/portal/definitions/howtomse.aspx

 

Network Inspection System definitions:

http://go.microsoft.com/fwlink/?LinkID=187316&arch=x86

http://go.microsoft.com/fwlink/?LinkID=187316&arch=x64

[[Repak] Microsoft Security Essentials x86/x64 4.5.216 (Intl)]

Question; can your package also add the nis_full.exe file as well?

FYI I use the following to quickly update my existing method and will now use it for yours

wget64.exe go.microsoft.com/fwlink/?LinkID=121721&arch=x64
wget64.exe go.microsoft.com/fwlink/?linkid=207870
wget64.exe download.microsoft.com/download/DefinitionUpdates/mpam-fex64.exe

[Working directory while Installer is running (batch)]

That is one of the best tools and I use it often... I also use Windows built in C:\Windows\System32\iexpress.exe

[Large Image Size]

I don't have specific answers for you but have you considered using USB for installs instead of DVD? I no longer burn DVD's and I love how fast the USB installs are.

[My Personal Image Integration Process]

Glad it could be of some use... I have been delayed in making my next update because I too have been refining my methods to make some improvements. Ironically they happen to be in Step-2 and Step-3 (driver Integration) and were prompted by the posts that have occurred over the last 2 weeks or so.

@compstuff

 

well, it took me my while to run through your post, , I Like the visuals thanks to your guide I was able to refine my own method by adapting some your concepts. Great stuff, Thanks for   :guitar: Rambling on ... :prop: