x23piracy Posted March 1, 2013 Share Posted March 1, 2013 Hi, is someone or maybe two interested in a howto that describes howto boot a prepared imagecreated with wintoolkit over pxe to install it? I have a working procedure and if you guys are interested i would write it down because it may help others. Greetz X23 IvanH 1 Quote Link to comment Share on other sites More sharing options...
compstuff Posted March 1, 2013 Share Posted March 1, 2013 I am extremely interested and was going to request this... thanksHi, is someone or maybe two interested in a howto that describes howto boot a prepared imagecreated with wintoolkit over pxe to install it? I have a working procedure and if you guys are interested i would write it down because it may help others. Greetz X23 Quote Link to comment Share on other sites More sharing options...
ianymaty Posted March 1, 2013 Share Posted March 1, 2013 I'm interested too. I have attempted sometimes but never succeded. :please: make a "How To". Quote Link to comment Share on other sites More sharing options...
bphlpt Posted March 1, 2013 Share Posted March 1, 2013 I am also interested, including how to verify whether your system is capable.Thanks in advance! Cheers and Regards Quote Link to comment Share on other sites More sharing options...
sp0iledbrat Posted March 1, 2013 Share Posted March 1, 2013 Need you ask? :please: Quote Link to comment Share on other sites More sharing options...
x23piracy Posted March 1, 2013 Author Share Posted March 1, 2013 (edited) Hi, Need you ask? :please: yes because it's not finished after 5 minutes... i don't want to do things that are maybe uselessI will make that howto but don't slap me if that isn't finished that weekend. Only in short: - You need to reconfigure your DHCP Server- You need a TFTP Server- You need WinPE- You need to prepare WinPE and so and so on QUESTION: Where should i place this howto ? Which subforum Greetz X23 Edited March 1, 2013 by x23piracy Quote Link to comment Share on other sites More sharing options...
bphlpt Posted March 1, 2013 Share Posted March 1, 2013 np, take your time and do it right. As to where, I'd say just start a new thread here. If it ends up being Win Toolkit specific, then Liam can move it where it is most appropriate, maybe here? If it is more general, then may a mod will decide here is better. The best thing is to just get one started when you can. Cheers and Regards Quote Link to comment Share on other sites More sharing options...
x23piracy Posted March 1, 2013 Author Share Posted March 1, 2013 Hi, i've just started writing the tutorial and i got brain****, it's more complex to describe as i thougth Greetz X23 Quote Link to comment Share on other sites More sharing options...
techbound Posted March 1, 2013 Share Posted March 1, 2013 This helped me lots:http://www.fooli****.com/tech-info/my-network-boot-setup/ I also use the D7 tool at my workplace. Quote Link to comment Share on other sites More sharing options...
x23piracy Posted March 3, 2013 Author Share Posted March 3, 2013 (edited) Started Tutorial... http://www.wincert.net/forum/topic/11055-installation-of-windows-7-over-network-boot-pxe/ Edited March 3, 2013 by x23piracy Quote Link to comment Share on other sites More sharing options...
x23piracy Posted March 4, 2013 Author Share Posted March 4, 2013 Hi, hmm i've started the tutorial and since then not a single view...Can't you see it? Or is my writing style such bad that you don't like it? http://www.wincert.net/forum/topic/11055-installation-of-windows-7-over-network-boot-pxe/ Greetz X23 Quote Link to comment Share on other sites More sharing options...
compstuff Posted March 5, 2013 Share Posted March 5, 2013 I am soo busy with my own integration and work issues that I didn't check yet because I want to be able to concentrate when I do... but trust me I am really interested and will definitely get to it... Thanks very much Quote Link to comment Share on other sites More sharing options...
Stimpy Posted March 5, 2013 Share Posted March 5, 2013 Just FYI, but if any of you own a fairly recent Synology NAS (I own an 109+) DiskStation, and they have just released DSM4.2, which has the ability to setup the NAS so it can be a PXE/TFTP server. I haven't figured it out yet, but it seems to do a lot of the server work for you in one device. Quote Link to comment Share on other sites More sharing options...
compstuff Posted March 5, 2013 Share Posted March 5, 2013 That's awesome I have a DS212jJust FYI, but if any of you own a fairly recent Synology NAS (I own an 109+) DiskStation, and they have just released DSM4.2, which has the ability to setup the NAS so it can be a PXE/TFTP server. I haven't figured it out yet, but it seems to do a lot of the server work for you in one device. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.