Jump to content

NIM

Administrator
  • Joined

  • Last visited

Everything posted by NIM

  1. I would like to make my PC even more quiet. I already have Antec P183 case which already is pretty quiet. as it has two fans with 3 different speeds, along with a 3-layer side panels for noise dampening. My Intel stock cooler is rather loud, and although it spins at the full speed, this temperatures don't look normal to me. CPU Idle: 37 Celsius CPU Load: 50-55 Celsius CPU speed (2056rpm) constant I have mount the Intel Stock cooler as is, without re-applying the thermal paste. See picture HERE. Because of that I was thinking of replacing the stock cooler with Scythe Zipang v2. Unfortunately, this cooler isn't available in stores here, so I was thinking about Scythe Shuriken. Any experiences with this coolers guys? Update: I've just found out that Sycthe Kabuto is available and should be a good alternative for Zipang 2. Also, I would like to change my two 120mm case fans with Scythe Slipstream 120mm, but I'm in doubt, as Scythe offers several different speeds for this coolers. Therefore you have it in 500rpm, 800rpm, 1200rpm, 1600rpm and 1900 rpm available speeds. Since 800rpm isn't available, but 500rpm and 1200rpm, I'm in doubt on which one to buy. Here are some reviews of it. http://www.silentpcr...age4.html#SS-SL http://www.silentpcr...page4.html#SS-L http://www.silentpcr...page3.html#SS-M http://www.silentpcr...page3.html#SS-H http://www.silentpcr...age2.html#SS-SH If those have fixed speed, does this mean that I can't buy one with more rpm and then reduce the speed with my case fan controller? Recommendations and advices are much appreciated.
  2. NIM posted a post in a topic in Funny Lounge
    <object width="640" height="385"><param name="movie" value=" name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
  3. First read this: http://newsolio.com/jennifer-stweart-3d-film-got-me-pregnant,9895 When you had a good laugh, read this.. http://gizmodo.com/5533219/woman-claims-she-became-pregnant-after-watching-3d-porno Journalism starts to suck big time
  4. LOL, you can't get Office 2007 for free just like that
  5. Thanks and welcome to the forums.
  6. I have never seen this or even similar issue. Does this happen in other browsers too?
  7. This looks pretty good. Thanks!
  8. NIM replied to a post in a topic in General Discussion
    Happy Birthday mate!
  9. NIM replied to NIM's post in a topic in Windows 7
    Thanks cluberti. This UPS 'jungo' driver was the only one which wasn't digitally signed. I will try to search for an updated driver.
  10. NIM replied to Dissscount's post in a topic in Windows 7
    Please check which version are you using, for a start on your laptop.
  11. NIM replied to Dissscount's post in a topic in Windows 7
    Which version of Windows 7 are you using? If you have upgraded your disk to dynamic disk, you won't be able to access it using Windows 7 Home Premium edition.
  12. NIM replied to LUZR4LIFE's post in a topic in Hardware Field
    Just wait, SSD's prices are going down.
  13. NIM replied to ZEUS__'s post in a topic in Site and Forum Issues
    Yes I know, but I just like IPB and we've been using it from the start, so I don't plan to upgrade in the near future. Once we install the new skin, I kindly ask you to report any issues you may find. Regards
  14. NIM posted a post in a topic in Windows 7
    I had two BSOD's on my new PC. Seems like a driver issue, but I'm not sure as I don't know how to read dumps. I have noticed that some updates/registry changes were made and then, before the login screen it crashed. Once I've restarted, everything was working as usual. Attached you may find Minidump files. Minidump.rar
  15. NIM replied to ZEUS__'s post in a topic in Site and Forum Issues
    Should be working now. Hopefully, I will be able to pay for the custom skin which should be same or very similar as our frontpage skin.
  16. NIM replied to diagg's post in a topic in Introduction
    Hello diagg, welcome to wincert. Hopefully you will be an active member with some contribution to our community. Regards
  17. NIM replied to XvXBladeXvX's post in a topic in Introduction
    I can help you with second shot voucher if you'll need it. Once you'll need it drop me a pm.
  18. NIM replied to XvXBladeXvX's post in a topic in General Discussion
    Blade, this is considered as warez and we don't allow warez to be posted here. Please refrain from any warez discussion on this forum. Forum Rules
  19. NIM replied to XvXBladeXvX's post in a topic in Introduction
    Once you decide to take the exam, I might get you second shot voucher, so if you fail, you can take it again with no charge.
  20. NIM replied to XvXBladeXvX's post in a topic in Introduction
    Welcome to the forums. I might help you on your certification track as I have couple of exams myself
  21. NIM replied to LUZR4LIFE's post in a topic in General Discussion
    Was or are? I hope that you ARE in top 3.
  22. NIM replied to LUZR4LIFE's post in a topic in Hardware Field
    Agreed, at which temperature PC restarted? Are you using stock cooler?
  23. Absolutely agreed. Whenever someone asks me for an advice on infected PC, I always said that backup/format/reinstall is the safest solution. But for some reason people find fighting the virus less frustrating than a clean install.
  24. NIM replied to LUZR4LIFE's post in a topic in General Discussion
    Good luck mate! Let us know the results
  25. NIM replied to NIM's post in a topic in Software Field
    I thought about that before posting. I guess maybe 0.1% and that is maybe Anyhow I posted it in case someone will finds it useful.