Guest Posted September 8, 2009 Share Posted September 8, 2009 WA Installer 2.7.0.0 Hi every one Today i present to you a nice tool allow you to install WA files on a running pc better for testing than doing a VM to test your files just report and it will be fixed the tools assign it self to WA extension Picture when you click on a files now to download Download MD5:DB3E82FF6BF78AF46E8C6E978821E5F1 enjoy hope you like the tool Thx For snakecracker for testing the tool and helping me tracing some bugs down Quote To Translate Translate this Lines [LangInFo] Lang=English [installer] UpperLabel=Install WA Installer on your Computer SecondLabel=WA Installer Will be Installed On Your computer&If you want to Continue Press Install [buttons] OkButton=OK UniButton=Uninstall CanButton=Cancel FinButton=Finish IgnoreButton=Ignore InstallButton=Install [Title] Choose=Choose Addons you want to install Error=Error Loading=Windows 7 Toolkit Addon Installer Installer=WA Installer Uninstaller=WA Uninstaller Install=Installing [Error] WrongParametrs=Wrong Parametrs&Check the Paramerts from This List&"/Uninstall" : To Uninstall this Tool&"/S" : Install the Program Without the Yes/No Window&"/Path:" :The Files Path to to WA File NoTasks=No Tasks.txt File Detected. Arch=Your OS Arch is&And the Program Requires Build=Your OS Build is&And the Program Requires [Label] Load=Loading Info Success=Got Installed successfully [install] Ques=Do you Want To Install Ver=Version By=By [uninstaller] UpperLabel=Remove WA Installer From your Computer SecondLabel=WA Installer Will be uninstalled From Your computer&If you want to Continue Press Uninstall UniLabel=Uninstalling WA Installer Uninstalled=WA Installer Got UnInstalled successfully Save it with the extension .lang then put it into "%programfiles%\WAInstaller\Lang" ,add it's name in Option.ini and upload it to integrate it WA Installer ChangeLog 2.7.0.0. (14-10) All 64 bit problems should be Fixed Now 2.6.0.0 (8-10) In case added the Case sensitive fix for the Arc , Website etc words now since there is no ! beside the build if the build didn't match and the build is higher it would pass Added Website link Fixed an issue in the code with 64 bit ( would be obvious if you using an addon that sends to the system32) << most of the times happens there Added German Language 2.5.0.0(25-9) New Modified build and arc reader (fixed case senstive problems) New Ignore Button (To Ignore Build or Arc not matching) New installer (you can choose language from it) New shortcut to run the program from it Added Progress Bar When Installing Addons Added Arc (Any,N/A) support with (case senstive disable) 2.1.0.0(17-9) Fixed 64 Bit issue with case sestive problem Minor bugs fixed V2(12-9) 1-ReWrote Tasks.txt Reader 2-New Uninstaller Look 3-New Parameters /S for Silent /Path: File Path /Uninstall to Uninstall 4-Multi Language Support 5-Fixed Program Compatibility about program might not be installed correctly 6-One Setup File for both 32-64 bit ----------------------------------- WA Installer 3 Beta V 3.0.6.0 This is beta so i won't remove the old tool until this gets done Download MD5:4869704db6df2698223c06e1eb3b5841 This got a Gui but most of old Functions Before 3 are gone i will try to work on it right now I'm just going for tracking down bugs so when it gets free of bugs then i will work on adding functions ----------------------------------- WA Command Line 0.1 This version is made especially for the cmd users it helps them in the silent install etc.. here is a Screen Shot Download Both x64 and x86 with 7za.exe Side Effects 7za extraction is not hidden MD5:5556FD12DF1CBBD3C9EF937F162B9113 WA CMD ChangeLog 0.1(5-3) Initial Version Quote Link to comment Share on other sites More sharing options...
Guest snakecracker Posted September 8, 2009 Share Posted September 8, 2009 I'll also add its a very good tool to use for making your own addons... I've been testing this tool for some time now and it has helped me out alot. Quote Link to comment Share on other sites More sharing options...
Jatin Beniwal Posted September 9, 2009 Share Posted September 9, 2009 Thanks Great One. Quote Link to comment Share on other sites More sharing options...
Guest Posted September 9, 2009 Share Posted September 9, 2009 Thanks Great One.thx for your reply i hope you like it Quote Link to comment Share on other sites More sharing options...
Guest Posted September 12, 2009 Share Posted September 12, 2009 Updated to 2.0.0.0 !Hope you like it Quote Link to comment Share on other sites More sharing options...
Legolash2o Posted September 12, 2009 Share Posted September 12, 2009 At least i don't have to make a WA Installer now Good work Quote Link to comment Share on other sites More sharing options...
*Reaper* Posted September 12, 2009 Share Posted September 12, 2009 Maybe integrate this tool into Windows 7 Toolkit?Nice work. :thumbsup_anim: Quote Link to comment Share on other sites More sharing options...
Guest Posted September 12, 2009 Share Posted September 12, 2009 At least i don't have to make a WA Installer now Good work thx lego well i have seen a lot of people of people wanted it and you have been busy so i said lets give a hand since we can do it and thx for your awesome toolMaybe integrate this tool into Windows 7 Toolkit?Nice work. :thumbsup_anim:about integrating the tool if lego wants it's no problem for me he can put it in the installer but i think it should be kept separated and thx for your replay Quote Link to comment Share on other sites More sharing options...
Legolash2o Posted September 12, 2009 Share Posted September 12, 2009 Nah, i'll keep it separate Quote Link to comment Share on other sites More sharing options...
wolfy Posted September 16, 2009 Share Posted September 16, 2009 Hello and thank you for this wonderful installer tool! However, I am encountering a problem. Whenever there is a specific choice of x86 or x64 add-ons, I get an error that says 'Your OS arch is x64 and the program requires x64'...I am using the 64 bit Windows 7 RTM and am selecting the 64-bit add-on, so I don't understand why this error occurs, and I am not able to install the add-on after closing the error.Any suggestions would be much appreciated and keep up the great work! Quote Link to comment Share on other sites More sharing options...
foxxx428 Posted September 16, 2009 Share Posted September 16, 2009 You're right there are problems on x64. 1.0.3 is fine but 2.0 isn't. I thought it was due to case sensitivity because I noticed the error was actually 'Your OS arch is x64 and the program requires X64' but I changed one of the addons to match and I still got the error. Quote Link to comment Share on other sites More sharing options...
Guest snakecracker Posted September 16, 2009 Share Posted September 16, 2009 Hello and thank you for this wonderful installer tool! However, I am encountering a problem. Whenever there is a specific choice of x86 or x64 add-ons, I get an error that says 'Your OS arch is x64 and the program requires x64'...I am using the 64 bit Windows 7 RTM and am selecting the 64-bit add-on, so I don't understand why this error occurs, and I am not able to install the add-on after closing the error.Any suggestions would be much appreciated and keep up the great work!I have told him about this he will fix asap! Quote Link to comment Share on other sites More sharing options...
Guest Posted September 17, 2009 Share Posted September 17, 2009 Hello and thank you for this wonderful installer tool! However, I am encountering a problem. Whenever there is a specific choice of x86 or x64 add-ons, I get an error that says 'Your OS arch is x64 and the program requires x64'...I am using the 64 bit Windows 7 RTM and am selecting the 64-bit add-on, so I don't understand why this error occurs, and I am not able to install the add-on after closing the error.Any suggestions would be much appreciated and keep up the great work!well yeah the tool had a lot of issue with a case senstive problemYou're right there are problems on x64. 1.0.3 is fine but 2.0 isn't. I thought it was due to case sensitivity because I noticed the error was actually 'Your OS arch is x64 and the program requires X64' but I changed one of the addons to match and I still got the error.well 2 had a lot of code changes i tired to add an early work around but it seems that it made stuff worth so i changed some stuff in the code to fix that issue and the problem is actually from case sensitive but there was another issue with it that made it do that Updated to WA Installer 2.1.0.0well snake tried the new version and it seems it fixed the issue i didn't do a lot of testing this timethere would be another version soon well finish the new installer soon and will support language chooser so if one made a translate upload it to me and will be added next version Quote Link to comment Share on other sites More sharing options...
Raoul Posted September 17, 2009 Share Posted September 17, 2009 (edited) Dutch translation:http://www.mediafire.com/file/mytqnm2mmmg/NLD.LangSize: 1.31KBMD5: b137ac3c6c639bebad184421d7c93a65 Edited September 17, 2009 by Raoul Quote Link to comment Share on other sites More sharing options...
pretep Posted September 17, 2009 Share Posted September 17, 2009 Hi,thx a lot for the updated version. But when I start under Win7 64 I get the message: "No Tasks.txt File detected"PRetep Quote Link to comment Share on other sites More sharing options...
Guest Posted September 17, 2009 Share Posted September 17, 2009 Hi,thx a lot for the updated version. But when I start under Win7 64 I get the message: "No Tasks.txt File detected"PRetepthis happens with which addon ?or all addons like that ?hmm does the program runs as admin or notthis problem might happen if you run the program from "program files" if you did that then reinstall the tool and then run a WA File i think i will release a fix if you run the tool from program filescause it deletes the files there Quote Link to comment Share on other sites More sharing options...
pretep Posted September 17, 2009 Share Posted September 17, 2009 this happens with which addon ?or all addons like that ?hmm does the program runs as admin or notthis problem might happen if you run the program from "program files" if you did that then reinstall the tool and then run a WA File i think i will release a fix if you run the tool from program filescause it deletes the files thereoh yes. I did so! And of course, in that way it works very well!I used the dreamScene addon, but after installing there is no dream ...maybe I should restart ...PRetep Quote Link to comment Share on other sites More sharing options...
Guest Posted September 17, 2009 Share Posted September 17, 2009 oh yes. I did so! And of course, in that way it works very well!I used the dreamScene addon, but after installing there is no dream ...maybe I should restart ...PRetepwell i already added plan to version 2.5.0.0the program would have a new gui when you click on the shortcut it would open a screen you choose the wa file and about the dreamscene the tool does install it with no problems but for some reason it doesn't work maybe today i will read more about it Quote Link to comment Share on other sites More sharing options...
pretep Posted September 17, 2009 Share Posted September 17, 2009 well i already added plan to version 2.5.0.0the program would have a new gui when you click on the shortcut it would open a screen you choose the wa file and about the dreamscene the tool does install it with no problems but for some reason it doesn't work maybe today i will read more about itGreat! Thanks a lot again ... See you later.Pretep Quote Link to comment Share on other sites More sharing options...
Jatin Beniwal Posted September 18, 2009 Share Posted September 18, 2009 oh yes. I did so! And of course, in that way it works very well!I used the dreamScene addon, but after installing there is no dream ...maybe I should restart ...PRetepdreamSene addon needs explorer restart to show options & it works fine after restart. Quote Link to comment Share on other sites More sharing options...
pretep Posted September 18, 2009 Share Posted September 18, 2009 dreamSene addon needs explorer restart to show options & it works fine after restart.Hm... But (unfortunately) not for me. After restart there is no way to use as background option with right mouse click on any *.mpg ...PRetep Quote Link to comment Share on other sites More sharing options...
pretep Posted September 19, 2009 Share Posted September 19, 2009 Hi,is there already a new version 2.5?Pretep Quote Link to comment Share on other sites More sharing options...
Guest Posted September 19, 2009 Share Posted September 19, 2009 Hi,is there already a new version 2.5?Pretepwell it's under construction i do that with most of my work i post what would be there when it's out soon but still i'm working hard on fixing the issuesreading a lot about autoit scripting language to find a new way to do the work Quote Link to comment Share on other sites More sharing options...
Guest Posted September 25, 2009 Share Posted September 25, 2009 Updated ! Please test and report Quote Link to comment Share on other sites More sharing options...
Raoul Posted September 25, 2009 Share Posted September 25, 2009 Dutch translation:http://www.mediafire.com/file/mytqnm2mmmg/NLD.LangSize: 1.31KBMD5: b137ac3c6c639bebad184421d7c93a65You saw this, right? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.