Jump to content
Sign in to follow this  
Lester Carballo

Windows 8 AIO x86+x64 netfx3 source conflict.

Recommended Posts

I would like to know the possibility count on a new tool.

The ISO of Windows 8, bring in your source folder sxs, the "sources" to install netfx3. The netfx3 sources are the 32-bit version for Windows 8 32-bit and 64-bit to 64-bit version of the installer. These sources are used to install Net Frameworks from terminal like:

dism /online /enable-feature /featurename: NetFX3 /All /source:X:\source\sxs /LimitAccess

When using All-In-One Integrator, mix the contents of the images (*.wim) of 32 and 64 bits, but not the installation "sources" of netfx.Could you create a merge of .Net x86 and x64 in the same folder sxs and not repeat the same files compared bit a bit?I programmed a script to know what are those files that are different, but they are in the same location on both architectures, however today brings running and still gives no results. May be useful I leave here.

Note: The script now has two versions. A comparison using the comp tool, which is much faster and another uses the fc tool that is slower. Both tools are distributed by Microsft. I have fixed existing bugs in the first script called script and was delete.

Thank you very much for everything you've done.

Tests-Duplicate.zip

Edited by Lester Carballo

Share this post


Link to post
Share on other sites

Maybe you can only do this if you change the manifest files to install .Net. I seen that moving the sources folder sxs only outside the disk some have been installed, so I assume that a part of the solution must be in the folders replacementmanifests end dlmanifests, but also in the SxS folder itself. I don´t know the operation of the tool dism completely. Therefore I don´t know what the specific files that indicate the route, to alter them and put the conditional installation in selft, for find the resource to instal in diferent location. If anyone knows anything about this and wants to share, would be greatly appreciated.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By Braga
      Save,
      How to create an installation image with all Windows Basic programs and drivers?
      For after installing Windows already do the automatic installation.
       
      att
    • By I_NEED_HELP
      Hi im new to this forum.
      Maybe i'm just to stupid but for me it does not work to load more than one installation file. When i load one installation file and then another, the entries from the first file disappear. I'm using the version 1.5.4.9. 
      Hopefully some can give me some advice. Thanks!
       
    • By niTe_RiDeR_Pr0
      CATEGORY: Adobe Runtimes/AiOs
      ABOUT: Adobe Flash Player v21.0.0.242 & v22.0.0.168beta (PPAPI+NPAPI Plugin & ActiveX) + Shockwave Player 12.2.4.194 + Adobe AIR v21.0.0.215 & v22.0.0.149beta Runtimes --> All-in-One RePack. [13.6.2016]

      + +
       
       
      INFO/NOTES:
      You can select which runtimes to install in the setup wizard. Shockwave player original msi installer repacked by me to slim it up (better compression, LZMA2). Removed Shockwave Player 10 compatibility files. NEW: Also added beta version AiO, containing latest beta versions of the runtimes. Updated on 13 June 2016.  
      DOWNLOADS: 
      Stable version: https://mega.nz/#!poRT2LxJ!KnikLatcxudi2HO3snwUhXbf6N5VRAG2IsuEdgVveqU
      Beta version: https://mega.nz/#!15QxRRZJ!W2ROf4zgxhLi2rVtOzUdazdMGkKKxVQw-mu9hWINsFA
      Architecture: x86 & x64
      VirusTotal Scan Report: Will be uploading later, but I am sure it is 100% safe.

      Enjoy!
      Cheers...
    • By niTe_RiDeR_Pr0
      Hello everybody,
      Today I will show you how to install Windows 8/8.1 on a PC without a CD/DVD/USB, directly onto the HDD, even without the installation wizard/setup ! [Fastest Method]
      Yesterday my new hard drive for my laptop arrived, and instead of cloning my existing disk, I decided to do a clean install of Windows 10. But I didnt have much time, cuz after installing windows 10, I had to copy my existing downloads, pictures, videos, install programs, etc. & I thought there must be some other way to easily install windows 10 without that installation wizard/setup. After some research, I made my own method, & installed it succesfully, faster than their setup wizard! Now I am gonna show you how to accomplish that. [This guide will work for Windows 8/8.1 also] Lets Begin!   
      Pre-Requisites
      Seperate Hard Drive with atleast 20GB space, with only 2 primary partitions [where you have to install Win8/8.1] [An empty/new hard drive is highly recommended] Working PC/laptop with Windows XP or above installed, with Internet access  Procedure:
      Firstly, download Windows 8/8.1 ISO & extract it to C:\win8 using some archive manager like 7zip/winrar, or COpy the Windows 8/8.1 CD contents to C:\win8. Now connect that separate hard drive to your PC (If you have externel harddrive cage, then connect to it, else buy a SATA to USB hard disk enclosure like this one) Open a command prompt as administrator (Go to start menu > search cmd > Rightclick on the first search result & RUn as administrator) Type: diskpart Now type: list disk It will show the disks connected to your PC. According to the size shown, you should be able to know which is your disk.  Type: select disk X  [Replace X with the disk number which you saw in the previous guide, in my case it was disk 1] Type the following one by one:  create partition primary size=350 format fs=ntfs unit=4096 label="System Reserved" quick active assign letter=P create partition primary size="Any size convenient for you, in MB" format fs=ntfs label="Windows 8" quick assign letter=Q exit Your partitions have been configured! Now, if you are in Windows 7 (or below), download DISM from here, open the file, when It will ask for extraction folder, change the location to: C:\dism
      Now in Windows Explorer, browse to c:\win8\sources (sources folder inside the folder where you copied/extracted setup files) & check whether you have install.esd or install.wim. Now you have to know the index number in the wim/esd file, of the Win8/8.1 edition which you want to install. Type the following commands in an administrator CMD: 
      cd c:\dism ## [DO NOT TYPE THIS] Skip the first line if you are running Windows 8/above. dism /get-wiminfo /wimfile:C:\win8\sources\install.esd ## This should output the index numbers of different windows 8/8.1 editios. ## Note down the index number of your chosen edition. ## Also, if you have an insall.wim instead of install.esd in your \sources folder, ## Then replace install.esd with install.wim (in 2nd command). Now, this is the most important step. All the windows files will be copied to the partition. 
      cd c:\dism Dism /apply-image /imagefile:C:\win8\sources\install.esd /index:1 /ApplyDir:Q:\ ## [DO NOT TYPE THIS] You can replace /index:1 with the index number which we ## found out earlier. ## Also, if you have an insall.wim instead of install.exe in your \sources folder, ## Then replace install.esd with install.wim (in 2nd command). If you have an install.esd file instead of wim file, Windows XP & Windows 8 users may (cuz I havent tested in them, but it works in 8.1 & 10) need to convert the install.esd file into an install.wim file (if some error shows up). Search in Google How to convert esd to wim Now you have successfully extracted all the files for windows! Now all you have to do is prepare the boot files in the System Reserved partition.
      Now you are gonna prepare the System Reserved partition for booting into Win8/8.1 succesfully. Type the following in administrator CMD:
      bcdboot Q:\Windows /l en-us /s P: /f ALL ## [DO NOT TYPE THIS] You can replace en-us with your locale, ## For eg. en-in, en-gb, en-ru etc. Everything is done! You are now ready to go! Now boot into the drive. If you did everything correctly & succesfully, then Windows will boot to the welcome screen. Done! Enjoy the manually installed Windows!   
       
      Hope this guide was helpful & easy to you. If you have doubt about something or you got any errors, or if windows doesnt boot after performing all the steps correctly, then feel free to post below.
       
      Cheers & Regards,
      niT3_RiDeR_Pr0
    • By ricktendo
      Info: Microsoft Visual C++ 2005/2008/2010/2012/2013/2014/2015, Microsoft Visual F# 2.0, Microsoft Visual J# 2.0 redistributable packages (with setup junk removed.) Also includes "extra" Visual Basic and C runtimes (see list bellow)

      Same as above but excludes F# & J# runtimes
       

      Info: Microsoft Visual C++ 2005/2008/2010/2012/2013 redistributable packages (with setup junk removed.) Also includes "extra" Visual Basic and C runtimes (see list bellow)
      Some tools and resources for (re)creating your own installer
       
      Visual AIO SFX Maker v6 (installer repacker):http://adf.ly/1713566/visualsfxSilent "No GUI" SFX alternative v4:http://adf.ly/1713566/visualsfxngKB2538242 MST Windows Update fix v1.7:http://adf.ly/1713566/wufix5mstKB2538243 MST Windows Update fix v3:http://adf.ly/1713566/wufix8mstMsiTran.Exe -a <transform>.MST <installer>.MSI:http://adf.ly/1713566/msitranSlim down your vcredist 2005/2008 installers:http://adf.ly/1713566/msislim"Extra" Visual Basic/C runtimes installer sourceshttp://adf.ly/1713566/vbcsourceIf you cant find a hotfix try using the KB number w/ this URLhttp://support2.microsoft.com/hotfix/KBHotfix.aspx?kbnum=1234567 Hotfix list
       
       
       
      Also includes:
       
       
      name version/*-- Microsoft Visual Basic Runtimes -----------------------------------*/ comct232.ocx 6.0.98.39comct332.ocx 6.7.0.9839comctl32.ocx 6.0.98.39comdlg32.ocx 6.1.98.41dblist32.ocx 6.1.98.39mci32.ocx 6.1.98.39mscomct2.ocx 6.1.98.39mscomctl.ocx 6.1.98.39mscomm32.ocx 6.1.98.39msdatgrd.ocx 6.1.98.39msdatlst.ocx 6.1.98.39msflxgrd.ocx 6.1.98.39mshflxgd.ocx 6.1.98.39msinet.ocx 6.1.98.39msmask32.ocx 6.1.98.39msstdfmt.dll 6.1.98.39msstkprp.dll 6.1.98.39mswinsck.ocx 6.1.98.39 picclp32.ocx 6.1.98.39richtx32.ocx 6.1.98.39sysinfo.ocx 6.1.98.39tabctl32.ocx 6.1.98.39vb40032.dll 4.0.29.22/*-- Microsoft Visual Basic Runtimes (16bit) ----------------------------*/vb40016.dll 4.0.24.22vbrun100.dll <none>vbrun200.dll 2.0.9.8vbrun300.dll 3.0.5.38/*-- Microsoft Visual Basic Virtual Machine -----------------------------*/msvbvm50.dll 5.2.82.44/*-- Microsoft Visual C Runtimes ----------------------------------------*/atl70.dll 7.0.9975.0atl71.dll 7.10.6119.0mfc70.dll 7.0.9975.0mfc70chs.dll 7.0.9975.0mfc70cht.dll 7.0.9975.0mfc70deu.dll 7.0.9975.0mfc70enu.dll 7.0.9975.0mfc70esp.dll 7.0.9975.0mfc70fra.dll 7.0.9975.0mfc70ita.dll 7.0.9975.0mfc70jpn.dll 7.0.9975.0mfc70kor.dll 7.0.9975.0mfc70u.dll 7.0.9975.0mfc71.dll 7.10.6119.0mfc71chs.dll 7.10.6119.0mfc71cht.dll 7.10.6119.0mfc71deu.dll 7.10.6119.0mfc71enu.dll 7.10.6119.0mfc71esp.dll 7.10.6119.0mfc71fra.dll 7.10.6119.0mfc71ita.dll 7.10.6119.0mfc71jpn.dll 7.10.6119.0mfc71kor.dll 7.10.6119.0mfc71u.dll 7.10.6119.0msvci70.dll 7.0.9955.0msvcp70.dll 7.0.9466.0msvcp71.dll 7.10.6052.0msvcr70.dll 7.0.9981.0msvcr71.dll 7.10.7031.4msvcrt10.dll <none>  
×
×
  • Create New...