Win Toolkit

Hello lego btw thanks for update :thumbsup: i'm report this BUGS... screensoot : I don't know which updates the non integratable to the offline image ,because it's wintoolkit not move to silent install ... Unlike KB2533552 KB2592687 KB2603229 update on windows 7 :doh: 2013-06-13_22-27-58.ini

Hi guys, i've used wintoolkit to slim down a windows 8 image with succes but i noticed a strange behavior: If i chose to delete natural language (in all in one integrator section) everything works ok, but in a second moment when i try to integrate the update: Windows8-RT-KB2769165-x64 manually with this dism command: Dism.exe /image:WIN8 /Add-Package /PackagePath:updates i receive an error and the update can't be applied. if i don't delete natural language, applying the same update success. So, the problem is in the natural language component remover. did someone had the same problem? any tips on how to solve the problem? thanks

quiero cambiar el nombre de esa carpeta. Quiero personalizar la ruta. Dónde puedo hacer eso? I want to change the name of that folder. I want to customize the route. Where I can do that?

Hi Legolash, I want to start by thanking you for this wonderful Tool! Amazing stuff! Right, I just performed a test integration on a hotfix that is causing me some trouble, and noticed that WinToolKit installs 2 hotfixes each time it is used. I have noticed that it's installing KB976902, which is a pre-requisite for installing Service Pack 1. However, after going to read the KB article, to verify what the Hotfix was, I noticed that it has been superseded by KB2533552. I advise that you should replace the built-in hotfix with this one, in the next build. Also, is it right that WinToolKit should install this KB at all to an official SP1 image? I'm under the idea that t…

Remember that most of my time is spent developing v2.x so no more features will be added to v1.x. Please be sure to check the test build section every so often so get the latest fixes.

http://www.wincert.net/forum/files/file/5-win-toolkit/ I believe it needs a bit updating, as it contains old information. For example Solor Updates are replaced by KUC ones, etc... Just to be accurate

hello, im using the latest build (1.4.1.28) and at All-in-one-Integrator im getting this error while removing (2 from 50 -->BitLocker Drive Encryption) after clicking at ok this windows opens: and than wintoolkit is frozen and i need to terminate the process operating windows is windows 7 ultimate (and i want to remove also from a windows 7 ultimate) i dont use any antivirus or firewall

If integration don't work with Wintoolkit, I doubt Dism... These are errors i get on Wintoolkit, what do they mean? Title: 15 error(s) have occurredErrType: Error (1.4.1.22)Description: Win Toolkit has recorded errors which occurred during integration and have been stored via '>> Details'.Exception:Exception:An error occured whilst integrating an update!Exception:Microsoft Windows [Version 6.1.7601]Copyright (c) 2013 Microsoft + TweakScene.com - All rights reserved.D:\-=Windows Versions=-\Black SeVen NINE Ultimate\Build tools\Build tools\WinToolkit140-77>Set SEE_MASK_NOZONECHECKS=1D:\-=Windows Versions=-\Black SeVen NINE Ultimate\Build tools\Build tools\WinTo…

Hi I know there is still development going on with wintoolkit but I just wanted to know: What does Wintoolkit do for windows 8.1 ?? I guess all im mainly interested in is removing the metro desktop tablets crap of windows 8.1 I have tried but wintool seems to fail at removing things? Id love to know what it does for windows 8.1 ?? Many Thanks

Is the wintoolkit translated in german and how can i buy this product....i cant find any Registration on http://www.wintoolkit.co.uk/Account/Login

I tried to integrate applications in silent mode install on Windows 7 x64 with latest version Wintoolkit. Why Wintoolkit starts before the last restart and not after? Wintoolkit starts too early, in AuditMode and not in FirstLogon pass. In this case, some applications are not installed (Adobe Reader, ACDSee, Net Framework, and others). In windows 7 x32 Wintoolkit starts when first logon and everything work fine.

Hello to everybody, My today's question is whether or not The Wintoolkit installer window appearing during the Windows 7 install can be hidden, or not shown at all? I hope this is not a violation towards program's most honorable Author. kind regards.

Hello i have one problem with wintookit installer! When i make .iso and next i create a bootable DVD with this .iso , the wintoolkit installer works correct (your program let me choose one or more apps for install on my system win764bit). When i try the same files in this DVD copy into my created partition with xcopy command from ms-dos , (i will to install my win7 without dvd like a recovery partition) , the win7 install correct but next when the wintoolkit installer try to run not works (stuck) , to let me choose my apps like before. the method which i try to copy my created installation dvd into my recovery partition is this: *sorry for my bad english . Thx for yo…

I used wintoolkit to enable dotnet 3.5 support on windows 8 64 bit. The resultant ISO installs fine in virtual box but there is no dotnet 3.5 enabled?. Any help in this regard.

for download anyone knows why?

Hy Legolash2o I would like to help the developing process with translating the program in hungarian language. Is that possible? Thanks for the replies

Hello Lately i`m having a problem with wintoolkit that i did not had before i`m making my windows 7 32bit image with it and i put some updates in the Updates and Language section after i press to start the process and it start to integrate updates it stuck in integrating update 1 out of 4 the time counts normal but it never finish its just stuck in first update i`ve added this four updates before without any problem and the windows 7 image i`m working it worked before without problem also.. i`m running widows xp sp3 i never had this problem before.

Hi @Lego, I have questions about the process order when win toolkit is working. Does win tool kit follow this process sequence as below? 1- to mount the image file first 2- if a multi image file, to get the desired folder by "removing config.exe" and delete others 3- integrate windows updates 4- upload silent and msi installers (if there is any) 5- delete windows components (language packs, sample music, etc.) 6- apply windows tweaks 7- integrate the drivers 8- create a new image 9- etc. As in the example above, does wintoolkit do all these processes In a correct and logical order automatically? Or what?

Problem: Wintoolkit RunOnce won't start!!! I have win7 x64. Tried 3 times on my computer from usb . Didn't test it from cd. It takes too long. Live! No results!!! I am using the latest build of WinToolkit.

The last few versions of the toolkit, I get a popup during windows install saying: right click theme patch and run as administer. I made my own solution by adding the already patched files but thought I would report this bug, thanks

I have run into problem : On my w7 x64 ultimate "Open CMD Here" folder shell-extension fails to recognize system32 folder (used for 64 bit console programs). I have integrated 64-bit version of nircmd (by NirSoft). When starting cmd from start menu > run, it finds nircmd.exe, but when starting from shell-extension, it fails. One that works, shows in title "Administrator : Command Prompt"and one that fails has in it's title "Administrator: C:\Windows\system32\cmd.exe"1. If this si a bug, please correct it in WinToolkit update 2. how can i fix this issue on currently installed modded windows ? It's kind of funny that command prompt started from 64-bit folder fails to…

Hello i wish to update a wa addon (framework) to the newest version in my windows iso, i just add it normal with wintoolkit and it will replace/update the previous addon? thanks

As you may have noticed we are coming up to build v1.5 and thought I should let you know what to expect and what I will be doing as we go towards version 1.5 but first I will explain why I haven't added many new features in the current v1.4 build. The reason I have not added as many features as planned in v1.4.0 such as component removal is because when v1.4 initially got released is because it received a huge boost in users and lots of bug reports started appearing. I'm not complaining about bug reports, I love them and love learning from my mistakes and improves my skills as a programmer. I then decided to focus v1.4 on bug fixes instead of requests and only added simpl…

Wintoolkit v1.5.4.8 keeps on crashing when I try to use the AIO integrater and apply changes when it finishes un-mounting an image it crashes screenshots and settings will be attached I'am also using one addon: the Directx_june2010 x86.WA Can someone veryfiy if this is a bug or is it some settings conflict Thanks for your help in advance Settings.txt Session save.ini Windows_7_Starter_x86_39156.log Windows_7_Starter_x86_72264.log

Wintoolkit v1.5.4.8 keeps on crashing when I try to use the AIO integrater and apply changes when it finishes un-mounting an image it crashes screenshots and settings will be attached I'am also using one addon: the Directx_june2010 x86.WA Can someone verify if this is a bug or is it some settings conflict Thanks for your help in advance BTW i disabled all Antiviruses and anti malware suites Settings.txt Session save.ini