Win Toolkit

Hi, I did try version .26 and got an error (uploaded) at the end of the run; I changed back to version .25 an d got no errors; I changed back to version .26 and I got NO ERRORS :g:! What could have caused the uploaded error? Between the runs I didn't make any changes. Regards, Thiersee

win 7 x64 sp1 services > distributed link tracking client - startup type not set (i set as disabled and it was automatic) Microsoft .NET Framework NGEN v2.0.50727_X64 - was set to automatic. i loaded a preset and for some reason this (and several other services) were checked, yet no change was made to the startup type

Dear All, Legolash2go has not been active for a long time. He said that he would have more time after his math exam and that he would take care of Winkit for the next three months. We have not heard from him last week. Do you know where he is and what is up to?

...I have selected my images, made my choices on each tab, and started the process. I then went and selected my unattended options and created an ISO. I was thrilled because it only took about 2.5 hours and I thought we had ourselves an AIO Win7 install disk. My test in VirtualBox wasn't unattended and none of the silent installers seemed to have run... I shut it down before I looked to see if the updates were installed because I am obviously going to have ot redo the thing. I looked around the tutorials but couldn't find anything... I am a bit tired though, and a few Heinekens in me... can somebody post a link for the ID10T that can't find his hand in the dark? Not sure…

Hi, I'm having a problem with Autounattend.xml. When I apply with W7T (quick or full, doesn't matter). I got "Device driver not found" error at setup and it asks me to find drivers. I also integrated "MassStorage DP_x86", so I can't still find the problem. Without Autounattend.xml, I don't have any problems at install. How can I solve this problem? Thanks

Hello! What has been bad Toolkit. 26 ... is just an extremely slow. I've been using the same machine toolkit regularly for years (Core i7, 4 * SSD RAID0, 12GB-DDR1866mem etc) is never done 19 hours of image change. I assumed that the bar after a visit image would have been prepared, it was not even the middle! In previous versions, the speed is fine.Sorry my bad English

Hi Legolash, I want to start by thanking you for this wonderful Tool! Amazing stuff! Right, I just performed a test integration on a hotfix that is causing me some trouble, and noticed that WinToolKit installs 2 hotfixes each time it is used. I have noticed that it's installing KB976902, which is a pre-requisite for installing Service Pack 1. However, after going to read the KB article, to verify what the Hotfix was, I noticed that it has been superseded by KB2533552. I advise that you should replace the built-in hotfix with this one, in the next build. Also, is it right that WinToolKit should install this KB at all to an official SP1 image? I'm under the idea that t…

This is the first time I have ever seen this... in fact I had just run a successful integration just before this and the only difference was I added KB2705624 to the hotfixes Error.txt EDIT: I just ran a new integration and it ran fine... one thing I did though before I started this one is I ran http://technet.microsoft.com/en-us/sysinternals/bb897440.aspx to clean the alternate data streams on my hotifx directories... but I think this was possibly a fluke error... not really sure

Can win toolkit be used behind a proxy. i cannot get to the udate catalog i get an error message. i have attach a screen shot.

im trying to add network drivers to the wim images on our wds server using wintoolkit. ive added the drivers to the boot image as well as the main image but when i boot the computer into pxe and it loads the boot file it still errors out saying a matching network driver cannot be found please add the network driver to windows pe image on the wds server. i know they are the right drivers so i dont know what im doing wrong. any ideas? thanks i also tried adding the drivers manually using dism to both indexes on the boot.wim but that didn't work either. does anyone have a windows 7 x86 boot file that works on optiplex 980s or can get one up and running. i really need this w…

Still some confusion over this item: How do we get McRips additions? The pointer in the tool is still referencing SoLoR's? How do we get McRip's Office updates http://office2010.cesidian.info/ ? The pointer in the tool is still referencing SoLoR's? Is there a way to automatically create a sub-directory when downloading McRip's files like the ones created for SoLoR's... McRip's download directly to the root location selected

Win Toolkit 1.4.0.26 > Main > Basic tab Gettine Started: All-In-One Integrator - explanation in words in box below. ISO Maker - explanation below. WinKit Guides - no explanation Recommended: Update Catalog - No explanation Windows 7 SP1 ISO - explanation below. Actually in the explanation box: All-In-One Integrator - matches icon above. ISO Maker - matches icon above. SoLoR SP1 Updates - no matching icon (did notice that selecting Update Catalog icon SoLoR was then made available - could be confusing.) Windows 7 SP1 ISO - matches icon above. Recommend edit to match icons and word descriptions so they match as to title and purpose; Intermediate tab and Advanced tab i…

I could have sworn that I asked before, but I can't locate the post... Everything seems to work as expected with a Vista SP2 disk (updates, tweaks, etc), but when the installer gets to the disk format/partition screen, the installer gets extremely slow. This is the case whether or not an Autounattend.xml file is used. The problem exists with Virtualbox and VMware, both of which are assigned CPUx2 and 4GB RAM. I am going to test on a bare metal box this afternoon. The problem doesn't occur with Windows 7. Has anyone else had this issue? Thanks in advance, ~S

as long as you're extracting files from the exe, i'm noticing that the files are not being deleted on exit in some cases... if check for updates is enabled and the version being started is old, and you click 'yes' to download the update (program exits), extracted files remain i'm also seeing the 'SevenZipSharp.dll' file remaining in other cases, though i can't specify how to reproduce just yet maybe there's some sort of exit routine you can run on WinToolkit.exe exit to be sure the cleanup always runs?

what is UTH.exe? when i applied registry tweaks to my live system, my firewall alerted about a TCP connection by UTH.exe in the program directory connecting to 204.245.162.11:80 when i checked the folder, there was no UTH.exe - is this an included file that is extracted and deleted as necessary?

I have tried this 2x now and it always shows red and seems to fail... is their a problem or does it need to be done to an online image? http://support.micro....com/kb/2666914

Everything working fine now, except for one thing. My silent install for dotnetfx isn't working, the installation isn't silent and during the installation I get different errors. After the other silent installs are finished and the pc booted into Windows I can run the installation with silent command from CMD without any problems. How to fix this?

Using latest version of Toolkit and it always complains about SWM file, but my ISO doesnt have one. Tried another one, still same, re-downloaded from included link, still complains about it. Ripped from my original RTM DVD it doesnt throw that error, ripped SP1 DVD it complains very same. Something doesnt seem quite right... :g: Maybe someone could tell me how to fix this? Theres absolutely no difference if I use x86 or x64 Image...also I didnt encounter this on earlier versions...

Hello everyone Here I have a small problem with Wintoolkit I got on the internet version of aio windows 7 home basic with in home premium x64 x64 x64 Professional and Ultimate x64 and I have recovered another x86 version with the same version the two versions made ​​in the eight versions have all the update until May 2012 and I try to merge everything works but it does not pass on my 69mb dvd5 ago in too Then I tried (Compoment Remover) on wintoolkit nikel everything works but when I change the backup file wintoolkit me grown so ca install.win going even better on my dvd5 Excuse me I do not speak English I used a translator Otherwise very very good software and very easy …

Hi @Lego, I have questions about the process order when win toolkit is working. Does win tool kit follow this process sequence as below? 1- to mount the image file first 2- if a multi image file, to get the desired folder by "removing config.exe" and delete others 3- integrate windows updates 4- upload silent and msi installers (if there is any) 5- delete windows components (language packs, sample music, etc.) 6- apply windows tweaks 7- integrate the drivers 8- create a new image 9- etc. As in the example above, does wintoolkit do all these processes In a correct and logical order automatically? Or what?

I have a problem running WinToolkit 1.4.0.21: today I tried three times to run WinToolkit and every time, after the run has completed, the temp-folder (D:\WinToolkit) has not been cancelled; as result I got "corrupted Image", if I restarted the programm, without a possibility to unmount this corrupted image! The temp-folder (Mount) has no content! Only if I delete the temp-folder can I restart WinToolkit and reload the same image. All this does not happen with version 1.4.0.18! Regards, Thiersee

As you have probably noticed I haven't been working on any requests, don't worry they will be done. At the moment I'm focussing on bug fixes and then once I'm confident they have been fixed I will resume working on requests. Please continue to post problems in the forum, if you have reported a bug and it's still present in v20 feel free to give that topic a "bump".

Greetings all, My apologizes for my noobiness. Although the description seems to be pretty straight forward, I'm still not 100% sure what this setting does exactly? I'm hoping there is a way to integrate my unattended.xml file I normally use the following command to do so: "sysprep /generalize /oobe /shutdown /unattend:C:\windows\panther\unattend.xml" I use Windows PE via PXE to install so the boot.wim is separate from the install.wim in this case. Any light on this subject would be appreciated. Thanks for your time. UPDATE: This Microsoft Article seems to indicate I can put my unattend.xml in the following location %WINDIR%\Panther for first time setup to use. Testing no…

I just noticed that the Direct ConnectAceess was automatically added before IE9... I have only used this a few times so I never noticed it before

Hello, I noticed, that all cab files, which are updates for .NET Framework 3.5.1, are marked red while integrating ( but it seem, that the integration works correctly ). For example: (see screenshot) Did someone know why ?